Aquatec permeate pump mounting kit for Model ERP-500 and ERP-1000 pumps. Everything you need for mounting your permeate pump! This kit contains:Aquatec permeate pump clipFour (4) 1/4″ push to connect x 1/4″ stem elbows4′ x 1/4″ OD Mur-Lok or John Guest food grade LLDPE tubing Two (2) #10 x 3/4″ stainless steel screws
80% RO Automatic Shutoff Valve (ASO) for Permeate Pumps (ASV100-RED, ASV-ERP-JG)
New Hydronamic Engineering 80% automatic shutoff valve (ASV100-RED or ASV-ERP-JG) specifically designed for reverse osmosis systems with permeate pump, to minimize TDS creep at startup. The valve is manufactured in the USA from virgin polypropylene using injection molding and very well constructed. The valve operates off a pressure signal and will automatically shut off water supply when tank pressure is approximately 80% of supply pressure. Retain the benefits of a permeate pump without sacrificing system pressure common with other ASO valves. Supplied standard with 1/4” QC x 1/4” MNPT John Guest male adaptors. Connections – 1/4″ John Guest push to connect fittingsValve Shutoff pressure – 80% of water supply pressureInstallation instructions providedIncludes two (2) 1/4” QC x 1/4” stem elbows
ERP-500. Aquatec ERP-500 Permeate Pump for Reverse Osmosis (Mounting Kit)
The Aquatec ERP-500 permeate pump is for RO systems 50 GPD or less. The pump uses no electricity, only hydraulic pressure from RO brine to pump permeate to the storage tank. Installation of a permeate pump will improve membrane performance and reduces brine water to drain by up to 80%. An RO system with a permeate pump requires no automatic shut off valve, which shuts off water flow when system pressure reaches 60-65% of line pressure. A permeate pump will continue to operate until system pressure is equal to line pressure, significantly increasing system pressure and water delivery to the faucet. Included in this pump package•ERP-500 Permeate Pump•Pump mounting and screws•Four (4) 1/4″ push to connect x 1/4″ stem elbows• 4′ LLDPE food grade tubing (Mur-Lok or John Guest)
Permeate Pump. Aquatec ERP-500 For Reverse Osmosis (Mounting Options)
Permeate Pump. Aquatec ERP-500 permeate pump Aquatec ERP-500 permeate pump is designed for RO systems 24-75 GPD. The pump uses no electricity, only hydraulic pressure from RO brine to pump permeate to the storage tank. Installation of a permeate pump will improve RO water recovery and reduce RO storage tank fill time, improve membrane performance and increase membrane lifetime, and reduce brine water to drain by up to 80%. An RO system with a permeate pump requires no automatic shut off (ASO) valve, which shuts off water flow when system pressure reaches 60-65% of line pressure. A permeate pump will continue to operate until system pressure is equal to line pressure, increasing system pressure 35-40% (compared to ASO valve) and water delivery to the faucet. The ERP-500 is equipped with a noise silencing insert, so the pump is extremely quiet while operating and will operate with supply pressure as low as 30 psi. Package Options: 1. Pump Only 2. Pump + Mounting Clip/Screws 3. Pump + Mounting Kit (see below for details) • Mounting Clip and screws • Four (4) 1/4″ push to connect and 1/4″ stem connectors • 4′ LLDPE food grade tubing
Permeate Pump. Aquatec ERP-1000 for Reverse Osmosis (Mounting Options)
Permeate pump. Aquatec ERP-1000. The Aquatec ERP-1000 permeate pump is for RO systems 50-120 GPD. The pump uses no electricity, only hydraulic pressure from RO brine to pump permeate to the storage tank. Installation of a permeate pump will improve membrane performance and reduces brine water to drain by up to 80%. An RO system with a permeate pump requires no automatic shut off valve, which shuts off water flow when system pressure reaches 60-65% of line pressure. A permeate pump will continue to operate until system pressure is equal to line pressure, significantly increasing system pressure and water delivery to the faucet. Package Options: 1. Pump Only 2. Pump + Mounting Clip 3. Pump + Mounting Kit • Mounting Clip • Four (4) 1/4″QC x 1/4″ stem elbows• 4′ LLDPE food grade tubing
Home Master TMAFC-ERP Artesian Full Contact Reverse Osmosis Water Filter System
Home Master TMAFC-ERP-L Artesian Full Contact Loaded RO System, 7-Stages, 99% Rejection DOW Membrane, Patented 2-Pass Alkaline Remineralization, Fast 4.5s Fill Rate, 1:1 Pure, Lux Faucet, Fridge kit. Only selling cause I found the new home comes with filter and had originally naught it for that. Don’t need it brand new it is 500$ on Amazon.
Permeate Pump. Aquatec ERP-500 For Reverse Osmosis (Mounting Options + tubing)
Brand new. Purchased on eBay but never opened or used.
Compact Energy-Efficient Aquatec ERP-1000 Permeate Pump for Brine Water Systems
Don’t settle for standard water output—opt for the Aquatec ERP-1000 and enjoy the benefits of a highly effective brine water system. Transform your water needs and experience extraordinary efficiency.
Aquatec ERP-500/ERP-1000 Permeate Pump Mounting Bracket/Mounting Clip
The Aquatec ERP-500/ERP-1000 Permeate Pump Mounting Bracket (or Clip) is a small, durable piece designed to securely hold your permeate pump in place within a reverse osmosis (RO) water filtration system. It keeps the pump stable, properly aligned, and protected from movement or vibration, helping the system run more efficiently and quietly. Made to fit Aquatec ERP-500 and ERP-1000 models, it’s an easy-to-install part that ensures your pump stays firmly mounted for reliable long-term performance. Brings 3/4 Screws. Item is Brand New, free shipping only for the 48 States.
Aquatec ERP-1000 Permeate Pump for Reverse Osmosis w/ Mounting Clip
With a 120 GPD capacity, durable construction, and simple installation using the included mounting clip, it ensures improved RO efficiency and long-lasting reliability.
