Max Water archivos | Página 16 de 16 | Blue Royal

3 Stage Whole house water Sediment Carbon Filter + 2 Dry Pressure Gauges

Detailed Description: 3 Stage Whole house water Sediment Carbon Filter + 2 Dry Pressure Gauges Are you concerned about dirt, odor, color, and bad taste in the cottage lake? Get clean & clear water in your whole house faucets. Perfect for Homes, Cottages & Offices. THIS WATER FILTER IS PERFECT FOR HOMES, APARTMENTS, COTTAGES, RV’S, SCHOOLS AND AQUARIUMS. Pre-loaded Filter Cartridges: Removes/Reduces: Sediment dirt sand silt scale rust particles Pesticides Bad tastes Turbidity Giardia Cysts Chlorine THMs Odors Herbicides chemicals & organic impurities Includes: 3 Stage White Steel Mounting Bracket Set of 3 Standard filters 10 inch x 2.5 inch 3 Standard Filter housings 3/4 inch NPT, All 3 Clear filter housings. 2 Dry Pressure Gauges 1.5 inch Opening Spanner / Wrench Installation instruction are included to DIY your own installation. Specifications: This system could start to generate the pure water at 20PSI. Maximum working pressure: 125 PSI Maximum Operating Temperature: 125°F (52°C) Dimensions: H 15 inch x L 17″ x W 6 inch Weight: 13 lbs Approx Flow Rate / 1 – 10* GPM Maximum for 3/4 inch Inlet / Outlet (this system is suitable for bachelors, couples , vacation homes & RV’s) * Pressure drop will be determined based on feed water pressure, filter cartridge selection, fluid viscosity, filter life and conditions. Replacement filters for this system. Sediment, GAC, CTO Filters Set322911710515 Filter cartridges should be changed every 6-12 months under domestic conditions. Filter life varies and depends on the water source quality.

Max Water All Clear 3 Stage Whole house Home water filter Sediment Carbon Filter

Detailed Description: Max Water All Clear 3 Stage Whole house Home water filter Sediment Carbon Filter Are you concerned about dirt, odor, color, and bad taste in the cottage lake? Get clean & clear water in your whole house faucets. This water filter is perfect for homes, apartments, Cottages, RV’S, Schools and Aquariums. Pre-loaded Filter Cartridges: Removes/Reduces: Sediment dirt sand silt scale rust particles Pesticides Bad tastes Turbidity Giardia Cysts Chlorine THMs Odors Herbicides chemicals & organic impurities Includes: 3 Stage White Steel Mounting Bracket Set of 3 Standard filters 10 inch x 2.5 inch 3 Clear standard Size Filter housings 3/4 inch NPT. Opening Spanner / Wrench Connect Filter Housings. Installation instruction are included to DIY your own installation. Specifications: This system could start to generate the pure water at 20PSI. Maximum working pressure: 125 PSI Maximum Operating Temperature: 125°F (52°C) Dimensions: H 15 inch x W 6 inch x L 15 Flow Rate / 1 – 10* GPM for 3/4 inch Inlet / Outlet (this system is suitable for bachelors, couples , vacation homes & RV’s) * Pressure drop will be determined based on feed water pressure, filter cartridge selection, fluid viscosity, filter life and conditions. Replacement filters for this system. Pleated, GAC, CTO Filters Set192058397829 Filter cartridges should be changed every 6-12 months under domestic conditions. Filter life varies and depends on the water source quality.

Max Water 3 stages Big Blue whole house Filter Housing Bracket

Detailed Description N-Type Big Blue Whole House Water Filter Housing Bracket for 3 Stage Filtration Systems Made from high quality 10 gauge steel with durable white finish, this is same bracket used in all our 10 inch and 20 inch Big Blue whole house water filtration systems. Mounting holes are punched into the back plane to allow easy mounting to the wall. This bracket can be used as a replacement part or to build your custom setup.High Quality Steel , Painted with bright White color to a fine finish. Please Note: This bracket may not work with all housing manufacturers, please check the spacing of the mounting points on your housing caps before purchase.

3 Stages 10″x 2.5″ 3/4″ Port Whole House Iron Manganese Max Water System Filter

Detailed Description: Max Water 3 Stages 10 Inch x 2.5 Inch 3/4 Inch Port Whole House Iron Manganese Water Filter Are you concerned about Iron , Manganese, dirt, odor, color, and bad taste in the cottage lake? Get clean & clear water in your whole house faucets. Perfect for Homes, Cottages & Offices. Three Stage Whole House Water Purifier Pre-loaded Filter Cartridges: –> –> –> Vertical Hydraulic Gauge * The first pressure gauge read your incoming feed water pressure (your city water or well water pump pressure) * The second gauge read unit internal pressure. Both gauges indicate when to replace the filters. When changes in reading start dropping, that is an indication that the cartridges are clogging with dirt and the water inside the system can’t pass through smoothly. –> Removes/Reduces: Mostly removes Iron manganese hydrogen sulfide Bad tastes & odors Turbidity Giardia Cysts Chlorine THMs Herbicides chemicals& organic impurities Sediment dirt sand silt scale rust particles Pesticides Includes: 1 x Three Stages White Steel Mounting Bracket Set of 3 filters 3 x Standard Filter housings 3/4 inch NPT 1 x Opening Spanner / Wrench Installation instruction are included to DIY your own installation. Specifications: This system could start to generate the pure water at 20PSI. Maximum working pressure: 125 PSI Maximum Operating Temperature: 125F (52C) Dimensions: H 15 Inch x L 15 x W 6 Inch Flow Rate / GPM Flow Rate / 1 – 10* GPM for 3/4 Inch Inlet / Outlet (this system is suitable for bachelors, couples , vacation homes & RV’s) * Pressure drop will be determined based on feed water pressure, filter cartridge selection, fluid viscosity, filter life and conditions. Applications: Electroplating, etching & image development process in PCB industry Filtration of electroplating fluid in conventional electroplating industry Pre-filter of DI & RO water filtration system for industry Filtration of low viscosity fluids of chemical Filtration of water for manufacturing processes & recycled water Approximate Life of Iron/Manganese Filter Cartridge: Filter life depends on the contamination level (iron equivalent) and amount of water consumed on a daily basis. You can use the following chart to estimate how long a filter will last in your case. «Iron Equivalent» is calculated as follows: (Iron level) + (2 x Manganese level) + (3 x Hydrogen sulfide level) If you are not sure about your Hydrogen sulfide level (it is hard to accurately test for) and you have a noticeable rotten egg odor, assume a Hydrogen sulfide level of 0.5 ppm. If the rotten egg odor is severe, assume a level of 1.0 ppm. Example: Test results are 0.8 ppm iron, 0.2 ppm manganese, and you have a rotten egg smell in your water. Iron Equivalent = (0.8) + ( 2 x 0.2) + (3 x 0.5) = 2.7 NOTE: Some water supplies contain tannins with the iron, if you have only tannins without iron in your water supply, please let us know so we can include a different media filter type. Manganese Sand is an efficient and economical media for the reduction of dissolved iron and manganese compounds from raw water supplies. It may be used in either gravity fed or pressurized water treatment systems. Manganese Dioxide acts as an insoluble catalyst to enhance the reaction between dissolved oxygen (D.O.) and the iron compounds. In ground waters the dissolved iron is usually in the ferrous bicarbonate state due to the excess of free carbon dioxide and is not filterable. It acting as a catalyst between the oxygen and the soluble iron compounds, enhances the oxidation reaction of Fe++to Fe+++ and produces ferric hydroxide which precipitates and may be easily filtered. The physical characteristics of Manganese Dioxide provide an excellent filter media which is easily cleaned by back washing to remove the precipitant. Manganese Zeolite is not consumed in the iron removal operation and therefore offers a tremendous economic advantage over many other iron removal methods. Other advantages of Manganese Dioxide include; long material life with relatively low attrition loss, a wide temperature performance range and extremely high removal efficiency. Negligible labor costs are involved because Manganese Dioxidedoes not require chemicals for regeneration, only periodic back washing is required. Replacement filters for this system. Sediment, Iron Manganese, CTO Filter Set192248132458 Filter cartridges should be changed every 6-12 months under domestic conditions. Filter life varies and depends on the water source quality.

1-25 Pcs 10″ x 2.5″ CTO Coconut shell Carbon Block Water Filter Reverse Osmosis

1 set of replacement filters with following : 5 x Sediment Filter 5 micron Dirt/Rust remover Size 9 7/8″ x 2.5″ – Fits most standard 10″ size housings and most reverse osmosis systems.Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water. Meets FDA requirements for food and beverage contact. No leachable or extractable material to contaminate outflowing water. Long life and increased dirt holding capacity. No surface binders to reduce flow and increase change-out frequency. –> 1 x GAC 10″ Coconut shell Carbon Filter Size 9 7/8″ x 2.5″ – Fits most standard 10″ size housings and most reverse osmosis systems. Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water. Thick Wall Coconut Base Carbon Filter Media – 100% coconut shell carbon Designed For maximum contact between the water and carbon. 1 Micron filter membrane included to prevent carbon fines to pass from the filter to your drinking water. Operation Temperature: 40°F to 125°F –> (1-25) x CTO Carbon Block Filter Size 9 7/8 inch x 2.5 inch Fits most standard 10 inch size housings and most reverse osmosis systems. Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water. Fits most standard 10 inch size housings and most reverse osmosis systems. Each filter is individually wrapped. 1 x Standard Inline Carbon Cartridges Dimensions: 2″ x 10″ – Fits standard Reverse Osmosis Systems – 10 Micron Nominal Removes Chlorine , Bad Taste & Odor ,Turbidity ,Sediment ,THMs and Dirt. Helps to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers Max Flow: 0.5 GPM Max Pressure: 125 PSI Max Temperature: 100°F Inlet/Outlet: 1/4″ NPTF thread (fitting is required) –> Total 10 filters, each individually wrapped. –> –> –> –> –> –>

Max Water 3 Stage 20″ Big Blue 1″ Port Whole House Water Filter + Pressure Gauge

Detailed Description: Triple Stage 20 Inch x 4.5 Inch Big Blue Heavy Duty Whole House Filter Are you concerned about dirt, odor, color, and bad taste in the cottage lake? Get clean & clear water in your whole house faucets. Perfect for Homes and Cottages Removes High Chlorine and other Odor taste from the water 1 inch ports (inlet Outlet Sizes) // System Water Flow Direction Setup is Right To Left (Right Inlet – Left Outlet) Replacement filters for this system. Pleated, Sediment, Gac: please check ebay item number 192380567920 Filter cartridges should be changed every 6-12 months under domestic conditions. Filter life varies and depends on the water source quality. Usually we use Whole House Water Filter to deliver safer, cleaner, water to every faucet and shower head in our whole house without drawing down water pressure.Our Whole House Water Filter designed with over-sized filters, housings to maintain the strongest water pressure as much as possible. Larger housings with larger filters require less frequent services, which saves your time, money, and efforts. Manganese Sand  is an efficient and economical media for the reduction of dissolved iron and manganese compounds from raw water supplies. It may be used in either gravity fed or pressurized water treatment systems. Manganese Dioxide acts as an insoluble catalyst to enhance the reaction between dissolved oxygen (D.O.) and the iron compounds. In ground waters the dissolved iron is usually in the ferrous bicarbonate state due to the excess of free carbon dioxide and is not filterable. It acting as a catalyst between the oxygen and the soluble iron compounds, enhances the oxidation reaction of Fe++to Fe+++ and produces ferric hydroxide which precipitates and may be easily filtered. The physical characteristics of Manganese Dioxide provide an excellent filter media which is easily cleaned by back washing to remove the precipitant. Manganese Zeolite is not consumed in the iron removal operation and therefore offers a tremendous economic advantage over many other iron removal methods. Other advantages of Manganese Dioxide include; long material life with relatively low attrition loss, a wide temperature performance range and extremely high removal efficiency. Negligible labor costs are involved because Manganese Dioxidedoes not require chemicals for regeneration, only periodic back washing is required. –> Recycle of regenerant and rinse water will conserve KMNO4 and rinse waste water This system is designed to provide an easy and effective method of reducing iron from water, which greatly improves the taste of your water as well. This system helps to eliminate the orange and brown stains often found in toilets, sinks, Etc….. It also reduces the possibility of damage to pipes and water heaters and reduces up to 3 ppm dissolved iron. –> Pre-loaded Filter Cartridges: –> Vertical Hydraulic Gauge * The first pressure gauge read your incoming feed water pressure (your city water or well water pump pressure) * Second pressure gauge read the second filter pressure drop when clogged. if there is a difference in the first and second gauges readings mean the second filter is clogged. * The third gauge read unit internal pressure. All gauges indicate you to replace the filters when changes in reading start especially when pressure drop increase, that is an indication that the cartridges are clogging with particular maters or the filters media is exhausted and the water inside the system can’t pass through the filters normally. Removes/Reduces: Sediment (silt, dirt, rust ETC.) Pesticides Bad tastes & odors Giardia Cysts Chlorine Turbidity Herbicides VOC (volatile organic compounds) THMs MTBEs Includes: 1 X 20 inch x 4.5 inch transparent clear filter housing with double o ring, pressure release button, brass ports + 1/8″ pressure gauge hole. 2 X 20 inch x 4.5 inch Big Blue filter housing with double o ring, pressure release button, brass ports + 1/8″ pressure gauge hole. 3 X Pressure Gauges Size 60MM , Range 10 Kg/psi, Indicate your filter changes when the inlet & outlet water pressure readings are not equivalent. 1 X 10 Micron Sediment Pleated filter 1 X 5 Micron PP spun Sediment filter 1 X 20 inch x 4.5 inch GAC Coconut shell carbon Filter 1 X Filter Wrench 1 X three stages Metal Wall Mounting Bracket 1 Year Limited Manufacturer’s Warranty Specifications: Sediment Filter Life Approx – 6 – 12 months. Carbon Filter Life – Minimum 20,000 – Maximum 35,000 Gallons Less than 1 psi pressure drop @ 20 GPM Maximum operating pressure: 90 PSI Operating temperature: 40-100°F (5-40°C) Dimensions: 27.5 inch height x 24.5 inch width x 8 inch depth Weight: Approx 42 lbs. Feed water pH range: 4.0-10.0 Preferable feed water pressure range: 20-90PSI to get the best filtration results keeps it less than 60PSI. Maximum feed water TDS: 2000PPM Flow Rate (GPM) 1-40* GPM for 1 inch Inlet/Outlet 1-35* GPM for ¾ inch Inlet/Outlet *Pressure drop will be determined based on feed water pressure, filter cartridge, fluid viscosity, filter life and conditions.

Agua BlueRoyal

Av. Solidaridad Lt. h2-51
San Juan de Miraflores
Tel: 970 169 048
ventas@aguablueroyal.com

Agua BlueRoyal
© Todos los derechos reservados 2021