Ships within 1-2 business days of purchase. Any major flaws will be listed in description. See photos before making purchase. Message me with any questions.
anti-fluoride ceramic + silver filter – TOP PORTION ONLY – use with your crock
Gravity Water Filter System Removes Fluoride!Removes bacteria and the harmful crap from your water! Description:(1) 1.75-gallon food-grade, BPA-free plastic bucket(1) 4″x4″ low-profile silver-impregnated ceramic filter with activated charcoal and anti-fluoride core (-) NOT WITH THIS AUCTION – Primo ceramic water dispenser with spigot(-) NOT WITH THIS AUCTION – cool wooden stand That’s it! It’s the simplest thing in the world! But it works, and gives you good-tasting water! A friend said he got a stainless steel Berkey that does the same thing – but with this, we got the same pure water to drink at a fraction of his cost! (And, if you have a large bottle of bottled water you want to use for company, just take the filter container off, and put the bottle on top of the crock – it works as a water dispenser, too!) These filters are produced here in the US, and are just as good – if not better – than the Sterasyl filters we used to use when we lived overseas. They are rated at 0.2 micron pore size, so they will filter 99.99% of particles larger than 0.2 microns in size. They are silver impregnated, so they actually KILL bacteria and amoeba that try to swim through the filter with the water! There is a core of activated charcoal that removes bad tastes and odors from the water, and a special matrix of anti-fluoride resin. To use this on a regular basis, you’ll have to clean the filter when the water that SHOULD flow through turns into a dribble. Some people use a green kitchen pot cleaner – if you do, make sure it’s an OLD one that’s been worn down, so you don’t wear down your filter too much. Anti-Fluoride filters like these should last 6 months, being used on a daily basis. Shipping note: 1 box with the plastic filter container for the top, along with the ceramic filter(s). Installation:It’s very easy to install the filter in the container. Take your filter out of the box, and you’ll see a wingnut and 2 silicon washers on the bottom. Unscrew the wingnut, and set it aside. Take one of the silicon washers off. Put the threaded shaft on the bottom of the filter through the small hole in the bottom of the container, so the shaft comes out the bottom of the container. The filter stays in the filter container. Put the silicon washer back on the threaded shaft, and then screw the wingnut back onto the shaft. When you tighten the wingnut, please hold onto the plastic base of the filter – DO NOT hold the filter, itself. If you hold the filter and you twist it off its base, you will have to purchase another filter. Turn the wingnut so it is tight. That’s it! Now set the filter container on top of the crock, and pour about 1 1/2 gallons of tap water into the container. The first time you use the filter, it’ll seem like it takes forever for the water to work its way through the ceramic. After they get saturated, it won’t take as long for the water to run through it, but please don’t expect to get a ton of water flow-through with a bucket this size. Also, please expect tons of little black thingies in the water the first few times you use the filter. That’s normal. It’s just some of the finely powdered activated charcoal slipping through the mesh lining in the core of the filter. Some people throw that water away, and put fresh water in the top bucket. I just drink the stuff. I used to pay good money for pills of activated charcoal for stomach problems, and finally realized that I could get that same charcoal for free if I would just ignore the dark specks and drink the water! Water flow-through depends on the «head» of water that’s above the filters. If you need a lot of water, get one of the uglier 5-gallon or 6-gallon plastic bucket systems that I’ve got listed. This will provide you with tasty water to drink, but you’ll have to be diligent about refilling the top bucket every time you fill up a glass from the full crock below. It’s a tortoise – not a rabbit. Replacement filters are available. They cost $35 each, or 2 for $66.50, plus shipping.I currently have a listing for the replacement filters – click on the «See Other Items» in the upper right hand corner of this page. I will include contact information along with the top filter assembly, so you can contact me directly with any questions, if you so desire. Rinse with clean water, and refill with any old pond or river water again.NEVER use soap on the filters. Soap will RUIN them. Technical Info: These filters will remove…99% Arsenic 599% Hydrogen Sulfide (Rotten egg odor – H2S)95% Chlorine and Chloramines99% bad taste99% bad odors98% Aluminum96% Iron98% Lead90% Pesticides85% Insecticides90% Rat poisons85% Phenols85% MTBE85% Perchlorate80% Trihalomethanes 95% Polyaromatic hydrocarbons100% Giardia Lamblia100% Cyclospora100% live Cryptosporidium (WRc Standard)100% Cryptosporidium (NSF standard 53)100% E. Coli, Vibrio Cholarae99.999% Salmonella Typhil, Shigella Dysenteria99.999% bacteria and Fluoride. Note: Because of the wide variations between municipalities and how much fluoride they put into their water systems, it’s impossible to generically determine the percentage that’s removed.At first, almost all of the tested municipalities’ fluoride will be removed. Then after 3-4 months, the efficacy goes down. These AFl filters need to be replaced approx. every 6 months to keep your fluoride levels down to the desired levels. The silver component of the filter will still be good – just dry the filter out after you replace it, and store it for later use when you are trying to filter the other impurities. Each filter should be good for a total of at least 1 year – depending, of course, how often it gets dirty and you have to clean it. Each cleaning removes the top layer of the ceramic shell…. Dry Storage Life: indefinite.Wet Usage Life: about 1 year for the silver ceramic shell, 6 months for the anti-fluoride element
anti-fluoride ceramic + silver filter and Primo water crock
Gravity Water Filter SystemRemoves Fluoride!Removes bacteria and the harmful crap from your water! Description:(1) 1.75-gallon food-grade, BPA-free plastic bucket(1) 4″x4″ low-profile silver-impregnated ceramic filter with activated charcoal and anti-fluoride core(1) Primo ceramic water dispenser with spigot(1) cool wooden stand That’s it! It’s the simplest thing in the world! But it works, and gives you good-tasting water! A friend said he got a stainless steel Berkey that does the same thing – but with this, we got the same pure water to drink at a fraction of his cost! (And, if you have a large bottle of bottled water you want to use for company, just take the filter container off, and put the bottle on top of the crock – it works as a water dispenser, too!) These filters are produced here in the US, and are just as good – if not better – than the British Sterasyl filters we used to use when we lived overseas. They are rated at 0.2 micron pore size, so they will filter 99.99% of particles larger than 0.2 microns in size. They are silver impregnated, so they actually KILL bacteria and amoeba that try to swim through the filter with the water! There is a core of activated charcoal that removes bad tastes and odors from the water, and a special matrix of anti-fluoride resin. To use this on a regular basis, you’ll have to clean the filter when the water that SHOULD flow through turns into a dribble. Some people use a green kitchen pot cleaner – if you do, make sure it’s an OLD one that’s been worn down, so you don’t wear down your filter too much. Anti-Fluoride filters like these should last 6 months, if they are used on a steady, daily basis. Shipping:Please note: This will come in 2 shipments: 1 box with the ceramic crock and wooden legs, and 1 box with the plastic filter container for the top, along with the ceramic filters. Note further – these must be shipped by either UPS or FedEx to keep the shipping charges low. If you cannot have it shipped to a street address, please don’t buy one.Installation:First, decide whether you want to use the wooden legs to support the crock, or not. If you want the legs, you’ll have to get a Phillips screwdriver and put it together. The big screw goes in the middle hole – the 4 smaller ones go around the edges. It’s very easy to install the filter in the container. Take your filter out of the box, and you’ll see a wingnut and 2 silicon washers on the bottom. Unscrew the wingnut, and set it aside. Take one of the silicon washers off. Put the threaded shaft on the bottom of the filter through one of the small holes in the bottom of the container, so the shaft comes out the bottom of the container. The filter stays in the filter container. Put the silicon washer back on the threaded shaft, and then screw the wingnut back onto the shaft. When you tighten the wingnut, please hold onto the plastic base of the filter – DO NOT hold the filter, itself. If you hold the filter and you twist it off its base, you will have to purchase another filter. Turn the wingnut so it is tight. That’s it! Now set the filter container on top of the crock, and pour about 1 1/2 gallons of tap water into the container. The first time you use the filter, it’ll seem like it takes forever for the water to work its way through the ceramic. After they get saturated, it won’t take as long for the water to run through it, but please don’t expect to get a ton of water flow-through with a bucket this size. Also, please expect tons of little black thingies in the water the first few times you use the filter. That’s normal. It’s just some of the finely powdered activated charcoal slipping through the mesh lining in the core of the filter. Some people throw that water away, and put fresh water in the top bucket. I just drink the stuff. I used to pay good money for pills of activated charcoal for stomach problems, and finally realized that I could get that same charcoal for free if I would just ignore the dark specks and drink the water! Water flow-through depends on the «head» of water that’s above the filters. If you need a lot of water, get one of the uglier 5-gallon or 6-gallon plastic bucket systems that I’ve got listed. This will provide you with tasty water to drink, but you’ll have to be diligent about refilling the top bucket every time you fill up a glass from the full crock below. It’s a tortoise – not a rabbit. Replacement filters are available. They cost $45 each plus shipping.I currently have a listing for the replacement filters – click on the «See Other Items» in the upper right hand corner of this page. I will include contact information along with the top filter assembly, so you can contact me directly with any questions, if you so desire. Rinse with clean water, and refill with any old pond or river water again.NEVER use soap on the filters. Soap will RUIN them. You can speed up the filtering by making a siphon hose:Get a piece of 5/16″ OD clear plastic hose, and push it up over the threads on the bottom of the filter. Let it hang down in the crock so the end rests on the bottom of the crock. When clear water flows and covers the end of the hose, it will start siphoning water through the filter, and will speed up the filtering process. Technical Info: These filters will remove…99% Arsenic 599% Hydrogen Sulfide (Rotten egg odor – H2S)95% Chlorine and Chloramines99% bad taste99% bad odors98% Aluminum96% Iron98% Lead90% Pesticides85% Insecticides90% Rat poisons85% Phenols85% MTBE85% Perchlorate80% Trihalomethanes 95% Polyaromatic hydrocarbons100% Giardia Lamblia100% Cyclospora100% live Cryptosporidium (WRc Standard)100% Cryptosporidium (NSF standard 53)100% E. Coli, Vibrio Cholarae99.999% Salmonella Typhil, Shigella Dysenteria99.999% bacteriaand Fluoride. Note: Because of the wide variations between municipalities and how much fluoride they put into their water systems, it’s impossible to generically determine the percentage that’s removed.At first, almost all of the tested municipalities’ fluoride will be removed. Then after 3-4 months, the efficacy goes down. These AFl filters need to be replaced approx. every 6 months to keep your fluoride levels down to the desired levels. The silver component of the filter will still be good – just dry the filter out after you replace it, and store it for later use when you are trying to filter the other impurities. Each filter should be good for a total of at least 1 year – depending, of course, how often it gets dirty and you have to clean it. Each cleaning removes the top layer of the ceramic shell…. Dry Storage Life: indefinite.Wet Usage Life: about 1 year for the silver ceramic shell, 6 months for the anti-fluoride element, if used on a continuous basis
ULTRA RARE Kinetico K5 VOC Guard Filter Set 9309A 9306B 12778 Silver – GENUINE
It provides a specialized barrier against synthetic contaminants that standard carbon filters simply cannot catch. 12778 Silver (VOC Guard): The «Gold Standard» for removing70+ advanced contaminants, including Lead, Pesticides, Herbicides, PFOS/PFOA, and Pharmaceuticals.
Kinetico 12778 K5 VOC Guard Cartridge Water Filter Silver
Genunie Kinetico K5 VOC Filter Sealed in Factory Packaging Ships Fast
Purewell 2.25G Gravity Water Filter System w Water Level Window 3-Stage TIMER
3X Longer Lifespan: 20,000 Gallons of Pure Hydration. Invest in health, not plastic waste. One pair of Purewell square series carbon filters provides an incredible 20,000 gallons of clean water—equivalent to the lifespan of 6 standard filters.
Reverse Osmosis Carbon Water Filter Cartridge Replacement For 5 6 7 Stage System
新建网页 1 Product Descriptions 3-Stage Pre-Filters 1st: PP sediment filter 2nd: GAC Filter filter (Granular Active Carbon) 3rd: CTO Filter (Compressed Activated Carbon Block) The 3 pre-filters remove large particles, dirt, sand, rust, taste, odor, and protect the RO membrane from chemicals like chlorine and chloramines, lead, etc. RO Membrane 4th Stage Filter: RO Membrane The reverse osmosis membrane is the heart of the RO filtration system. It removes up to 99.99% of heavy metals, dirt, fluorides, total dissolved solids, organic chemicals, bacteria, and viruses invisible to the naked eyes. The purified water will flow through the tube in the middle. Post Carbon 5th stage filter: T33 filter It removes the tastes &odors, further improve the smooth taste of the drinking water. PH+ Filter 6th Stage Filter: ALK Filter It rebalances the water with active mineral technology adding calcium, potassium, magnesium, and other essential minerals back to the water, giving your drinking water a more natural taste. Specification： 1.PP Sediment Filter The main function of sediment filter is to remove large and fine particles from a drinking water.The filter can reduce 99.99% sand, scale, rust, sediment, particles.Will greatly help reduce microparticles in the water.The filter can filter up to 13,000 gallons of water depending on the water quality. The filter should be replaced every 3-6 months so that you can continue to taste the fresh water. SpecificationPore Size(μm): 5.0Size(inch):10Material:100%melt-blown thin fiberOuter Diameter(mm):63Inner Diameter(mm):28Recommended Change-out Differential Pressure(Bar):2.1bar@20℃Maximum Operating Differential Pressure(Bar):1.0bar@70 ℃; 3.5bar@20 ℃Maximum Operating Temperature(℃):80℃Lifetime: Replace the cartridge every 6 months. 2.GAC Granular Activated Carbon Filter SimPure Granular Activated Carbon (GAC) Water Filters is made of highly porous coconut shell carbon with high adsorption capacity, providing effective reduction of chlorine, organic chemicals from your water. Remove chlorine, organic chemicals, suspended particles, tastes and odors from water for cleaner, better tasting drinking water.Fits for most under sink filtration, RO/DI filtration system,10” standard whole house filtration system or any type of water filtration unit with 10″ housing. SpecificationGranular Activated Carbon Water Filter CartridgeMicron rating: 5 MicronSize: 10” x 2.5”Max. Pressure: 80 psiMax Temperature: 104°F (40°C)Material: Premium Quality Coconut Shell CarbonLifetime: Replace the cartridge every 6 months. 3.CTO Carbon Block Filter Sintered activated carbon filter is made of high quality coconut shell carbon. Outer layer has food grade plastic net wrapping PP non-woven fabrics. Reduces sediment, chlorine, organic chemicals, taste and odor, etc.Drop-in designed for easy and quick filter change. Durable and sealed end caps with sealed silicon O-ring prevent leak. Compatible with Penteck EP-10, DuPont WFPFC9001, Whirlpool WHA2BF5, GE, Culligan D10-D, watts WCBCS975RV, etc. SpecificationCarbon Block Water Filter CartridgeMicron rating: 5 MicronSize: 10” x 2.5”Max. Pressure: 80 psiMax Temperature: 104°F (40°C)Material: Premium Quality Coconut Shell CarbonLifetime: Replace the cartridge every 6 months. 4. 75/100 GPD Reverse Osmosis Membrane High Quality RO Membrane—Thin Film Composite membrane, rejects impurities down to 0.0001 micron. High permeated flow and stable salt rejection.Environmentally Friendly & FDA Registered—Green and Unique design for higher flow, lower waste water ratio and stable rejection rate.Ro Membrance with FDA Registered, NSF/ANSI 58 Certified approved to ensure safety. SpecificationMaterial: Thin Film Composite Reverse Osmosis MembraneAverage Permeated Flow: 75/100 GPDFilter accuracy: 0.0001micronStable Rejection Rate: 96 %Test pressure: 60 psiRecovery Rate of Single Element: 15%Max Feed water Temperature: 45°C(113°F)Max Working Pressure: 300psiMax Feed water Permeated Flow: 7.6LPM (2.0GPM)pH Range of Feed water during Operation: 3~10Max Feed water SDI15: 5Residual Chlorine Concentration of Feed water: ≤0.1ppmLifetime: Replace the cartridge every 24 months. Universal FiltrationStandard sized fits any standard 10 inch filter housing.Compatible with systems from: Culligan, 3M, Aqua-Pure, GE, APEC, Pentek, Whirlpool, Global Water, iSpring, DuPont,etc.Tested by independent third-party to meet NSF/ANSI Standard, will not leach contaminants back into your water. 5.T33 quick connect inline carbon filter Made of coconut shell granular activated carbon.It is well known as the last stage of standard Reverse Osmosis filtration system. It can improve water tasting quality and remove any traces of chlorine, organic chemicals, bad tastes and odors due to its highly porous activated carbon. As its unique filtration performance, it is ideal for refrigerators, icemakers, coffee machines, water coolers and more. Membrane Solutions carbon filter is the best choose for your home filtration. SpecificationInline carbon filterMicron rating: 5 MicronSize: 10” x 2”Connections: 1/4” Thread (come with 2 fitting,can quick connect the 1/4″ tube)Max. Pressure: 80 psiMax Temperature: 104°F (40°C)Material: Premium Quality Coconut Shell CarbonLifetime: Replace the cartridge every 12 months. 6. pH+ Filter The alkaline filter improves the pH value of the RO water which could be slightly acid after the reverse osmosis process. The filtered water has a PH value of 7-8.5, which helps minimize the fluctuations of your body’s pH. Size: 10” x 2”Connections: 1/4” Quick connectionsMax. Pressure: 80 psiMax Temperature: 100°F (°C)Lifetime: Replace the cartridge every 6 months or earlier—Depending on your water quality. 4 Stage of Mineralization: Tourmaline – Adds ionically activated mineral content to your water to allow for maximum mineralization and alkalization. Muyu Stone – Muyu stone has a strong purification effect on water, it can absorb harmful substances in the water and improve water quality. Far infrared activated ball – It can adsorb ompurities in the water. When combined with water, it can dissolve various trace elements and minerals that are benefical to the human body. Anion ball – Redeces the odor and chlorine of the water, eliminate harmful substances. It can make the water quality alkalescen, has a large content of calcium, magnesium, sodium, potassium and other trace elements and various minerals needed by the human body. SimPure Reverse Osmosis Water Syetem Series T1 5-Stage 100G T1 5-Stage 75G T1 6-Stage 75G Y7 UV Water Dispenser Filter Type PP + GAC + CTO + T33 + 100 GPD RO Filter PP + GAC + CTO + T33 + 75 GPD RO Filter PP + GAC + CTO + T33 + 75 GPD RO + ALK Filter CF Composite Filter + RO Membrane Filter Filtration 5-Stage Filtration 5-Stage Filtration 6-Stage Filtration Countertop UV + 3-Stage Filtration Filter Lifespan 6-12 Months 6-12 Months 6-12 Months 6-12 Months On Mar 14, 2023 at 22:15:04 PDT, seller added the following information:
Brita Elite Faucet White Replacement Filter – 2 Pack
The Brita Elite Faucet White Replacement Filter comes in a pack of 2, providing clean and fresh water for your household. Made from lead-free material, this carbon block filter effectively removes chlorine taste and odor, ensuring your water is safe and delicious. With a manufacturer warranty of 3 years, you can trust the quality and durability of this faucet filter. Designed for Brita compatibility, this filter is a convenient and essential addition to your kitchen, delivering clean water every time you turn on the tap.
eSpring Replacement Filter Cartridge UV Technology Amway Water Purifier 100186
Top Tier Water Purification: Experience top-tier water filtration with the Amway eSpring Water Purifier. Enhance Your Health & Taste: Savor the crisp, refreshing taste of pure water, free from harmful pollutants and microorganisms.
ZeroWater 5-stage water filter replacement – 4 pack
Plus, you can help stop plastic waste and save up to 110 single-use plastic bottles per filter. 15 Gallon estimated water filter life: Filter life can vary depending on your water quality. Eco-friendly: Save up to 110 single-use plastic bottles per filter or up to 660 bottles a year while enjoying cleaner, healthier water.
