1 set of replacement filters with following : 1 x Sediment Filter 5 micron Dirt/Rust remover Size 9 7/8 inch x 2.5 inch – Fits most standard 10 Inch size housings and most reverse osmosis systems.Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water. Meets FDA requirements for food and beverage contact. No leachable or extractable material to contaminate outflowing water. Long life and increased dirt holding capacity. No surface binders to reduce flow and increase change-out frequency. 1 x Pleated Sediment Filter Size 9 7/8″ x 2.5″ – Fits most standard 10″ size housings and most reverse osmosis systems.Pleated Polypropylene Sediment Filter 5 micron Used to Remove small particles & suspended matter such as silt, rust, sand, algae, sediment, scale particles from water. Meets FDA requirements for food and beverage contact. Washable filter to help minimize the filtration cost. Operation Temperature: 40°F to 140°F. Low surface area, lower pressure drop. –> 1 x Siliphos Anti-Scale Filter Scale Prevention Used to sequester water hardness, inhibit precipitation, and formation of mineral deposits in pipes & appliances. Corrosion Inhibition Used to form a protective coating on metal surfaces and provide corrosion protection against acidity, alkalinity, and many other mineral salts which may lead to the «rusting out» of water system pipes and equipment. Iron Control Used to sequester dissolved iron up to 10 ppm; Great for reducing discoloration and metal taste for water and helps prevent iron from staining sinks, showers and toilets. 1 x CTO Carbon Block Filter Size 9 7/8 inch x 2.5 inch Fits most standard 10 Inch size housings and most reverse osmosis systems. Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water. Total 3 filters, each individually wrapped.

1 set of replacement filters with following : 1 x Sediment Filter 5 micron Dirt/Rust remover Size 9 7/8 inch x 2.5 inch – Fits most standard 10 Inch size housings and most reverse osmosis systems.Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water. Meets FDA requirements for food and beverage contact. No leachable or extractable material to contaminate outflowing water. Long life and increased dirt holding capacity. No surface binders to reduce flow and increase change-out frequency. 1 x Pleated Sediment Filter Size 9 7/8″ x 2.5″ – Fits most standard 10″ size housings and most reverse osmosis systems.Pleated Polypropylene Sediment Filter 5 micron Used to Remove small particles & suspended matter such as silt, rust, sand, algae, sediment, scale particles from water. Meets FDA requirements for food and beverage contact. Washable filter to help minimize the filtration cost. Operation Temperature: 40°F to 140°F. Low surface area, lower pressure drop. –> 1 x Iron / Manganese Water Filter Product Overview Iron manganese media, used for removing soluble iron (Fe) and/or manganese (Mg) as well as hydrogen sulfide (H2S) from well water supplies, is a purple-black filter media processed from ceramic zeolite granule. Iron manganese media can be used in a completely closed pressure system with no aeration or re-pumping, or in an open gravity filter system. The most common methods of operation are continuous regeneration, which is recommended for predominantly iron water. Physical Characteristics Apparent Density: 1.0 g/ml Shipping Weight: 2.5 Lbs Specific Gravity: 2.5~2.6 Screen Grading (dry): 16~30 mesh Effective Size: 0.65 ± 0.05mm Uniformity Coefficient: Less than 1.5 pH Range: 6.2 ~ 8.5 Maximum Temperature: 25 C° Maximum Pressure Drop: 0.85 kg/cm2 1 x CTO Carbon Block Filter Size 9 7/8 inch x 2.5 inch Fits most standard 10 Inch size housings and most reverse osmosis systems. Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water. Total 3 filters, each individually wrapped.