Metal archivos | Blue Royal

1 Green High Capacity 10 x 4.5” Whole House Filter Purifier System 1” Brass Port

High Capacity 10 x 4.5” Whole House Filter Purifier System for Well or City Water, Presser Relief Button, 1” NPT Brass Port, Double O-Ring, Meets NSF Standards & Regulations (Green, 1 Set) Product Description DURABLE STRUCTURE: 10”x 4.5” Green Housing Set is proper for high-flow applications. The housing body is made of reinforced polypropylene for strength & resistance to chemicals, the black cap is made of high-flow polypropylene for toughness. Food grade material makes all filtered water is safe & healthy. The cap has 1″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. This unit is appropriate for well water, commercial & industrial filtration. POINT OF USE: Those Housings for use in various high-flow applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances Keeps water fresh by reducing and removing iron, manganese, chlorine, hydrogen sulfide, herbicides, pesticides, and other industrial chemicals. EASY TO OPERATE: There are 2 rubber O-rings on the top of the housing body to ensure a watertight seal. Such design allowed properly seal cap and housing body to prevent water leakage when you replace cartridge. The built-in red pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. According to system size leave 4 inches free space should be left between bottom of the system and floor to allowed easy filter cartridge replacement. ACCEPTS 10”x 4.5” Big Water Filter Cartridges as: Ronaqua, 3M 70020162437, DuPont WFHDC8001, Watts MAXETW-FF975, ClearChoice 84629, Liquatec CB-450-975-05, SDF-45-1005, CTO2-HD10, Pelican CB-BB-10, EP-BB, EPM, CCBC & CEP Series, DGD-5005, Trojan CB-BB-10, WCBFF975, American Plumber WDGD-5005, Aqua-Pure AP810, AP814 and AP811, Pentair DGD-5005, 9108-44, DEV9108-44 (Sold Separately) WELL-MATCHED MODELS OF HOUSINGS: BIG-CLEAR-LX-10 and A48249, Aqua Filter Plus 150237-INSTKIT, BLUONICS BLBB20GAC, BLBBC10 and BLBB10x2, iSpring HB18B, OMNIFilter BF7-S-05 and BF7-S-S06, American Plumber W10-PR, Watts W10FFPH1CBPR, SimPure RSWHB001Z_S8, AB-WH10BBN, Geekpure BB-10T and BB-10B, EcoPure EPWO4, Culligan HD-950A, Aquaboon AB-WH10BB-1S10BB5M Description: The 10″x 4.5″ Green High Capacity Housing for Whole House Water Filtration System with 1″ Inlet / Outlet Ports (RA-HS-6T) is proper to use for reducing sediment, dirt, rust, & suspended particles in incoming water to you house. The green housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene for toughness. The black cap has 1″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. The Double rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Those Housings for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation. Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs. WARNING: OPERATING PRESSER NO MORE THAN 60 PSI Following Cartridges Excepted by This System (Sold Separately) 1O x 4.5” Polypropylene Sediment Cartridge 1O x 4.5” Pleated Washable & Reusable Sediment Cartridge 1O x 4.5” Coconut Shell Carbon Block Cartridge 1O x 4.5” Granular Activated Carbon Cartridge Sediment Filter is often the first filter installed in the Whole House Water Filter circuit. It is often the first point of contact between your water supply and your home and is used as a pre-filtration unit before the water continues to reverse osmosis and activated carbon filters. It catches unwanted particles, including sand, dirt, silt, rust, and other fine particles as they attempt to enter your house’s water system. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. 10″ x 4.5″ filters are made of fine-melted polypropylene that are blown and spun into cylinder-like form. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, as well as household water appliances like boilers, refrigerators, ice-makers, and many more, to perform better for longer periods of time. Removes: Sediment Rust Sand Particles Pleated sediment water filters reduces sand, dirt, silt, rust, & scale particles in residential and commercial water. Pleated filters are made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. These materials trap suspended particles, materials that block microbes and adsorb unwanted chemicals or substances that cause a chemical change to the water, such as acid neutralization. The pleated design provides an amplified surface area that may extend the filter’s life while removing undesirable particles and chemicals from the water by means of a semipermeable barrier, adsorption, & biological processes. Those filters are washable & reusable. Advantage of pleated filters is that they protect against a lower pressure drop & allow increased water flow rates. Pleated cartridges outperform standard wound, spun, & melt blown filters because of their re-usability. Removes: Sediment Rust Sand Particles Activated Carbon Block filters are made of fine coconut shell carbon. They remove odors, undesirable colors, and unpleasant tastes of many organic compounds. These filters also are effective in removing chemicals like iron, manganese, chlorine, and hydrogen sulfide from your water to name a few. By removing these unwanted byproducts, you can rest assured that you will have access to fresh and clean water. Since these filters are made of a finely packed carbon (forming a cylinder block), they offer a much finer filtration of suspended particles and dirt. Chlorine removal is what carbon is best at, and nothing else equals carbon’s ability to remove chlorine. Removes: Chlorine Odor Taste Pesticides Granular Activated Carbon filters are made of fine coconut shell carbon. They remove odors, undesirable colors, and unpleasant tastes of many organic compounds. These filters also are effective in removing chemicals like iron, manganese, chlorine, and hydrogen sulfide from your water to name a few. By removing these unwanted byproducts, you can rest assured that you will have access to fresh and clean water.All Ronaqua GAC filters are made with high quality coconut shell carbon crushed into positively charged granules. The positively charged granules in the filter remove negative ions from the water, such as: chlorine, fluorides, ozone, and dissolved organic solutes, effectively providing good general-purpose drinking water. Chlorine removal is what carbon is best at, and nothing else equals carbon’s ability to remove chlorine. Removes: Chlorine Odor Taste Pesticides High Capacity 10 x 4.5” Whole House Filter Purifier System can purify the water coming into your home for Well Water and Municipal Tap Water. It can deliver effective protection for the pipeline, water purifier, water heater, wall hung gas boiler, washing machine, dishwashers, showers, and other terminal water appliances. The filter cartridges used in this system will retain the particles out of the pipes and plumbing equipment, you don’t need to spend money on heavy repairs and parts replacements maintenance. Protect Your Home and Appliances Improve Your Life by Providing Clean Drinking Water Time and Money Saving Solution Universal Usage Forget about dirty bad-smell and bad-tasting water. High capacity water filtration system will efficiently remove sediment, large and fine particles, chlorine, odors, and tastes of many organic compounds extend the service life of water heaters, washing machine, dishwashers, reverse osmosis systems, and all plumbing fixtures. Our individually designed whole house water filtration system by removing, chlorine, and other contaminants, provide clean and fresh water for your family, protect your loved ones, and reduce the use of bottled water. We are proud to deliver the perfect water your household and safe our Planet by reducing use of the plastic bottles. High capacity, durable construction, high quality material, easy operation offered by Ronaqua water filtration systems will save your time and money to supply your whole house with crystal clean water. These housings made from food grate material and meet NSF (National Science Foundation) standards and regulations. Tanks to durable construction, and easy maintenance those housings can be used in many different applications: Food and Beverages Oil and Gas Fine Chemicals Electronics Metal Finishing Pulp and Paper

2.8 Gallon RO Water Storage Tank for Reverse Osmosis System NSF Certificated

NSF certificated NSF certificated 2.8 gallon plastic tank. Inlet and Outlet Top : Stainless steel 1/4″ NPT1/4″ thread for tank ball valve. Bottom : check / charge / release pressure point. Dimension Smart size ,special for little cabinet. Store less pure water, ensure you drink pure water. Specification: Shelf life: 3 Years. Service life :5 Years min. Pre-charge pressure (empty tank) :5-7 psi. More valuable information: Question : Where can we use this tank? Answer : It is special used as storage tank for Reverse Osmosis System. Question : What is dimension of 2.8 Gallon tank? Answer :please leave space 9.6″x9.6″x14.6″ for the tank. Question : What is in the box? Answer :Just 1 x 2.8 gallon tank in the box,you should buy tank ball valve separated. Question : Where can I buy tank ball valve? Answer :Please search product in our store or contact the seller. It is for 3/8″ tube . Question : BPA free? Answer :Yes, BPA free. Note: 1.It Is Recommended to Wait Until the Entire System Is Pressurized and Re-Check for Any Leaks Before Leaving Installation Site. 2.The First 2 Tanks of Water Produced Should Not Be Used

SimPure 2-Stage 10×4.5″ Big Blue Water Filter Housing System Whole House Replace

SimPure DB10C-2 10″ x 4.5″ 2 Stage Whole House Water Filtration System (1″ Inlet/Outlet Port) with Big Housings & Pressure Relief Valve- GAC Filter, Carbon Block, Sediment Filter Cartridges – Remove Silt, Sand, Rust, Dirt, Chlorine, Taste & Odors, Iron, Lead, Manganese – Whole Home/Pool/Well/Farm Water Filters Portable Steal Frame About This Item: 2-Stage Filtration: The SimPure DB10C-2 is a 2 Stage Whole House Filtration System (PP Sediment + CTO). 1st filter (PP sediment filter) can remove dirt, silt, sand, rust and scale particles. The 2nd- filter(CTO carbon block filter) can remove chlorine, chloramine, VOCs, bad taste and odor. Extend the life of your dishwasher and other appliances, and reduce cost of the energy. Easy and Convenient: Clear Housing is convenient to indicate and track of your filter life .It is time to replace a new one when you find PP sediment is dark yellow or brown color.It is Installed at the main water supply and produce pure water for your entire home. Enjoy better water from every tap and every appliance in the whole house. Main Features: With our instruction you can use and install DB10C-2 2-stage whole house water filtration system with no problem. Housing Bracket so You can choose mounted or unmounted installation. Clear Housing help you to know which filter and when you need to change. Remove the filters easily by the Pressure Release Buttons. The black cap has 1″ female National Pipe Thread Taper (NPT) threaded input and output connections, DOUBLE O-ring to ensure watertight seal. Easy Installation: This DB10C-2 water filtration system connects directly to your home’s main water supply and fits standard American plumbing with 1” NPT inlet and outlet. It comes with a installation and maintenance guide. And It Is Easy to Replace Water Filter Cartridges: All SimPure Water whole house water filter replacement cartridges are designed for quick and easy replacement to keep your system up and running. Durabel Design: The SimPure DB10C-2 Water Whole Home Water Filtration Systems is constructed with standing stainless-steel frames for long term durability and quality. Features: 2 Stage Filtration: Stage 1:PP Sediment Filter – Remove dirt, silt, sand, rust and scale particles , etc. Stage 2:CTO Filter – Remove chlorine, chloramine, VOCs, bad taste and odor, etc Double O-Ring ensure watertight seal Three accessible pressure release buttons for easy filter change Big Clear Housing let you know when to replace the filters The pressure relief Valve: Let you replace the filter cartridges easily Standard 1” female NPT thread connections and long high efficiency housings for easy adaptability and high flow Specifications: Material: 100% food-grade ABS + Metal + Stainless Steel Filter Size: 10 * 4.5 Inch Filter Life (Months): 6-12 Month Flow Rate (GPM): 15 GPM Inlet/outlet Connection: 1″ female NPT thread Temperature Range: 41-100℉ (5-38℃) Pressure Range: 25 – 90 psi Package Includes: Accecories: 1x Wrench 2x Screws 2x Plastic Expansion Nail 4x Installed O-rings (2 in each housing) 2x Teflon Tapes 1x Punch Positioning Sticker Item Model DB10C-2 System: 1x DB10C-2 assembled housing kit with bracket 1x Pre-Installed Filters (1*PP sediment+1*CTO filters) DB10C-2 + Extra 1 Set Filter: Total 4 Filters 1x DB10C-2 assembled housing kit with bracket 1x Pre-Installed Filters (1*PP sediment+1*CTO filters) 1x Extra Set Filters (1*PP sediment+1*CTO filters) DB10C-2 + Extra 2 Set Filter: Total 6 Filters 1x DB10C-2 assembled housing kit with bracket 1x Pre-Installed Filters (1*PP sediment+1*CTO filters) 2x Extra Set Filters (2*PP sediment+2*CTO filters) DB10C-2 + Extra 3 Set Filter: Total 8 Filters 1x DB10C-2 assembled housing kit with bracket 1x Pre-Installed Filters (1*PP sediment+1*CTO filters) 3x Extra Set Filters (3*PP sediment+3*CTO filters) DB10C-2 + Extra 4 Set Filter: Total 10 Filters 1x DB10C-2 assembled housing kit with bracket 1x Pre-Installed Filters (1*PP sediment+1*CTO filters) 4x Extra Set Filters (4*PP sediment+4*CTO filters) Please Note: Not all of the filters are included in the package, please choose the model you need in the selection.TroubleshootingShippingReturnPaymentContact usTroubleshooting FAQ: Q:Leaks between filter head and filter bowl of housing A1: Tap water pressure is too high; make sure it is below 90psi (620kpa). If too high, fit a pressure regulator. The O-ring may not be in place. Clean and lubricate. A2: O-ring with silicone grease. Also, clean the groove where the O-ring sits. Replace O-ring in the groove above threads. Screw the bowl back on the filter head securely by hand, then use the wrench to fit it snugly. Do not over tighten. Q: Leaks on inlet/outlet connections A1: Wrap the Teflon tape around pipe threads of each fitting in a clockwise direction, add more tape as necessary for the correct seal. A2: Brass fittings may require to tighten ½-turn with a wrench. Do not over tighten. Q: Leaks from the pressure release button A: The pressure release button has a screw under the bracket.Simply tighten that screw and the leaking should stop. Q: Water Pressure is slowing after some time A: Recommended changing the cartridges every 6-12 months depending on the amount of contaminants present in the feed water supply. If the system has been working correctly and the water pressure is slowing, it may be time to change the filter cartridge element. (review cartridge instructions) Q: Water Pressure is slowing immediately after installation when using a Carbon Cartridge A1: Check the filter cartridge has not been installed incorrectly. Make sure the plastic wrapper around the filter has been removed. A2: Bathtubs, utility sinks, garden hoses, showers, or anything considered high flow should be avoided for the first 72 hours. Any high-flow situation within the first 72 hours may cause a temporary carbon blockage. To clear the blockage, turn off any running water for at least 10 minutes and resume using water at low or regular flow rates. Q: Water appears cloudy and grey A: The water may appear cloudy or grey for the first 3-5 days after installation due to the tiny air bubbles being purged from the filters and extra carbon dust in the water. (depending on the filter cartridge being used) To solve this problem, please flush the whole system for about 10 minutes after you install it, then close the faucet and wait for one hour. And repeat the steps until the output water is clean.Shipping Fast shipping by USA LOCAL FAST SHIPPING, All of the products will be shipped out within 1 working day after we received the payment and your contact phone number. Why Choose the USA Stock? 1. USA Local Shipping, No Extra Customs Cost to the USA 2. Fast Delivery: 2-5 Working days Delivery 3. Best After-Sales Service!!!Return1. Accept Return in 60 days for refund or replacement, goods in resalable condition.2. Offer two year for repair warranty.3. Contact for address and reference number before return(note: unannounced parcel may be returned to wrong address, seller will not be responsible for this).4. No factory warranty for the man-made damage.PaymentWe accept all major Credit cards, PayPal, and Google Pay. Taxes may be applicable at checkout.Contact usSERVING USA SINCE 2006. SimPure dedicated in providing world-class quality of water filtration solutions. If you are not satisfied with your purchase, then we want to hear from you. Please contact our trained water specialists. And is available to answer any questions during the life of the product.

Agua BlueRoyal

Av. Solidaridad Lt. h2-51
San Juan de Miraflores
Tel: 970 169 048
ventas@aguablueroyal.com

Agua BlueRoyal
© Todos los derechos reservados 2021