EBay FREE SHIPPING* Brand new in box. Check out pics for more details * I will ship to the 48 states only OR to the international shipping hub. will not ship directly to Alaska or Hawaii or anywhere outside the 48. that would cost way more than the 20 bucks or so I am making after I pay for fees and normal shipping rates. sorry for the inconvenience
10″ x 4.5″ for Big Blue Whole House Sediment Pleated Water Filter 5/20/50 Micron
Universal Fit: 9-7/8″(Length) x 4-1/2″(Outer Diameter) x 1-1/10″(Inner Diameter), 5/20/50 Micron pleated water filter replacement cartridge is fits most 10″ filter housings for bench top, under-sink or whole house filtration system. Pre-filter for residential, commercial, agricultural and industrial applications. Efficient Filtration: This filter cartridge has a larger specific surface area than original sediment filters because of pleated design. Remove sand, dirt, silt, rust and scale particles more effectively. It provides you with stable and continuous water flow without obvious pressure drop. Ensure the experience of water using. Protect Water Equipment: As the first line of defense in the filtration system, it can effectively prevent the clogging of water pipes and prolong the service life of water equipment. Please note this filter can’t remove chlorine to improve water taste. Six Month Service Lifetime: Our high dirt-loading capacity sediment filters can last up to 30,000 gallons. The filtered capacity and change-out cycle depend on inlet water quality or filters’s running/using time. For better water quality, filters should be replaced in time. Washable & Reusable: The water filter cartridge replacement can be washable for multiple times, but it’s working effectively while the cartridge itself is not dirty, or following the change-out cycle we recommend to avert re-contamination of filtered water. Specification: Micron Rating: 5/20/50 Micron Flow Rate: 5-10 GPM Sediment Reduce Rate: > 99% Filter Medium: Polyester Inner Core: Polypropylene End Caps: PU/Plastisol Maximum Operating Temperature: 75℃ (176℉) Compatible Part or Model Numbers: 3M 70020164177, 70020315159, 70020170547 American Plumber WRC25HD, WDGD-5005, W50PEHD APEC FI-CAB10-BB, FI-SED10-BB Aquaboon AB-1C10BB5M, AB-1PL10BB1M, AB-1PL10BB5M, AB-1S10BB1M, AB-1S10BB5M, ABP-1C10BB5M, AB-1SW10BB1M, AB-1SW10BB5M Aquacrest AQU-WF80, AQU-WF88, AQU-WF88A, AQU-WF89 Aquapure AP810, AP811, AP814, AP817 Culligan RFC-BBSA, R50-BBSA, CP5-BBS, CW5-BBS, CW25-BBS, P25-BBSA Express Water FLTWH1045C, FLTWH1045S Fil-fresh FF-CTO, FF-CWF01, FF-GAC, FF-PP1, FF-SDF FrigiLife PP10BB-CC, PPL10BB GE FXHSC, FXHTC Hydronix SDC-45-1001, SDC-45-1005, SDC-45-1010, SDC-45-1020, SDC-45-1050, SPC-45-1001, SPC-45-1005, SPC-45-1010, SPC-45-1020, SPC-45-1030, SPC-45-1050, SWC-45-10-0.5, SWC-45-1001, SWC-45-1005, SWC-45-1010, SWC-45-1020, SWC-45-1030, SWC-45-1050, SWC-45-10100, SMCB-4510, CB-45-1001, CB-45-1005, CB-45-1010, SDP-4510 Icepure CTO10BB, PP10BB-CC, PP10BBGD, PPL10BB, PPW10BB iSpring FC15B, FG15B-KS, FM15B, FP15B, F2WGB21B, F4WGB21B KleenWater KW810EC Membrane Solutions CTO-F10B, MPP-F10B, WPP-F10B, PGC-F10B Pentair Pentek ECP1-BB, 255489-43, ECP5-BB, 255490-43, ECP20-BB, 255491-43, ECP50-BB, 255492-43, WP.5BB97P, 355212-43, WP1BB97P, 355213-43, WP5BB97P, 355214-43, WPX5BB97P, 355217-43, WP10BB97P, 355215-43, WPX10BB97P, 355218-43, WP25BB97P, 355216-43, WPX25BB97P, 355219-43, WPX50BB97P, 355220-43, WPX100BB97P, 355221-43, CBC-BB, 155170-43, FloPlus-10BB, 455905-43, EP-BB, 155548-43, EPM-BB, 155782-43, GAC-BB, 155153-43, R30-BB, RFC-BB, 155141-43, NCP-BB, 155398-43 Pureplus CTO10BB, PP10BB, PP10BB-CC, PP10BBGD, PPL10BB, PPW10BB Simpure CTO-F10B-5, MPP-F10B-5 Waterdrop WD-W80, WD-W88A, WD-W89, WD-WF99, WD-WF10F Whirlpool WHKF-GD25BB, WHKF-DWHBB, WHKFDWHBB Compatible Housings: Most brands’ 10″ x 4.5″ housings (Outer diameter 7″ at the top and 5.5″ at the bottom approx.): Ace Hardware, Aquaboon, Cuno, Flotec, Fulflo, Geekpure, Honeywell, Master Plumber, Omni, Sears, Teledyne, Water Pik, etc. American Plumber W15-PR, W10-PR (152014) APEC HBB-10, HBB-10-15, HBB-10-34, HBW-10, HBW-10-15, HBW-10-34, HBBK-10, CB1-SED10-BB, CB1-CAB10-BB AquaPure AP801T (5639203), AP801B (5639201), AP801 (5585701), AP801-C, AP801T-C, AP801-1.5-C Culligan WH-HD200-C, HD-950A GE GXWH35F, GXWH40L, GXWH30C, GXWH47J, GNWH38S Hydronix HF45, HF45-10BLBK34PR, HF45-10BLBK34, HF45-10CLBK10PR, HF45-10CLBK10, HF45-10BLBK10PR, HF45-10BLBK10, HF45-10BLBK15, HF45-10CLBK34 iSpring HB18B, WGB21B, WGB21BM, WGB21B-PB Pentair Pentek 150237, 150426, 166083, 166219 SimPure DB10, DB10C, DB10C-2, DB10P Whirlpool WHCF-WHPLBB Disclaimer: The lists are under continuous updating. Please contact us via eBay message if you don’t find your system model here. This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Applications: *Whole House Filtration This sediment water filters intercept all sands from raw water so there are no sands entering the water pipes in the house, which protects water lines as well as the faucets to prolong the lifespan and provide pure water for you. *Under-Sink Filtration You will no longer have to clean the strainer of faucets every month if installing this filter. All you need to do is change-out the filter regularly. Great for removing grits, clay soils, sands soil and iron scales, etc. *Extend Equipment Lifetime It can be as a pre-filter to remove the most of sediments from raw water before which entering the follow-up water treated system, such as the water softening process or other filters. *»Green» & Water Saving Rainwater/rainfall collected from the roof can be filtered and used for watering your garden, flushing toilets, doing laundries, washing cars, showers, washing dishes, or swimming water in pools. Package Includes: 1 Pack: 1 x Water Filter 2 Pack: 2 x Water Filter 4 Pack: 4 x Water Filter 6 Pack: 6 x Water Filter 8 Pack: 8 x Water Filter On Jun 20, 2024 at 22:51:13 PDT, seller added the following information:
12 Pack 10″ x 4.5″ Whole House Washable Pleated Sediment Water Filter Cartridges
Universal Fit: 9-7/8″(Length) x 4-1/2″(Outer Diameter) x 1-1/10″(Inner Diameter), 5/20/50 Micron pleated water filter replacement cartridge is fits most 10″ filter housings for bench top, under-sink or whole house filtration system. Pre-filter for residential, commercial, agricultural and industrial applications. Efficient Filtration: This filter cartridge has a larger specific surface area than original sediment filters because of pleated design. Remove sand, dirt, silt, rust and scale particles more effectively. It provides you with stable and continuous water flow without obvious pressure drop. Ensure the experience of water using. Protect Water Equipment: As the first line of defense in the filtration system, it can effectively prevent the clogging of water pipes and prolong the service life of water equipment. Please note this filter can’t remove chlorine to improve water taste. Six Month Service Lifetime: Our high dirt-loading capacity sediment filters can last up to 30,000 gallons. The filtered capacity and change-out cycle depend on inlet water quality or filters’s running/using time. For better water quality, filters should be replaced in time. Washable & Reusable: The water filter cartridge replacement can be washable for multiple times, but it’s working effectively while the cartridge itself is not dirty, or following the change-out cycle we recommend to avert re-contamination of filtered water. Specification: Micron Rating: 5/20/50 Micron Flow Rate: 5-10 GPM Sediment Reduce Rate: > 99% Filter Medium: Polyester Inner Core: Polypropylene End Caps: PU/Plastisol Maximum Operating Temperature: 75℃ (176℉) Compatible Part or Model Numbers: 3M 70020164177, 70020315159, 70020170547 American Plumber WRC25HD, WDGD-5005, W50PEHD APEC FI-CAB10-BB, FI-SED10-BB Aquaboon AB-1C10BB5M, AB-1PL10BB1M, AB-1PL10BB5M, AB-1S10BB1M, AB-1S10BB5M, ABP-1C10BB5M, AB-1SW10BB1M, AB-1SW10BB5M Aquacrest AQU-WF80, AQU-WF88, AQU-WF88A, AQU-WF89 Aquapure AP810, AP811, AP814, AP817 Culligan RFC-BBSA, R50-BBSA, CP5-BBS, CW5-BBS, CW25-BBS, P25-BBSA Express Water FLTWH1045C, FLTWH1045S Fil-fresh FF-CTO, FF-CWF01, FF-GAC, FF-PP1, FF-SDF FrigiLife PP10BB-CC, PPL10BB GE FXHSC, FXHTC Hydronix SDC-45-1001, SDC-45-1005, SDC-45-1010, SDC-45-1020, SDC-45-1050, SPC-45-1001 , SPC-45-1005, SPC-45-1010, SPC-45-1020, SPC-45-1030, SPC-45-1050, SWC-45-10-0.5, SWC-45-1001, SWC-45-1005, SWC-45-1010, SWC-45-1020, SWC-45-1030, SWC-45-1050, SWC-45-10100, SMCB-4510, CB-45-1001, CB-45-1005, CB-45-1010, SDP-4510 Icepure CTO10BB, PP10BB-CC, PP10BBGD, PPL10BB, PPW10BB iSpring FC15B, FG15B-KS, FM15B, FP15B, F2WGB21B, F4WGB21B KleenWater KW810EC Membrane Solutions CTO-F10B, MPP-F10B, WPP-F10B, PGC-F10B Pentair Pentek ECP1-BB, 255489-43, ECP5-BB, 255490-43, ECP20-BB, 255491-43, ECP50-BB, 255492-43, WP.5BB97P, 355212-43, WP1BB97P, 355213-43, WP5BB97P, 355214-43, WPX5BB97P, 355217-43, WP10BB97P, 355215-43, WPX10BB97P, 355218-43, WP25BB97P, 355216-43, WPX25BB97P, 355219-43, WPX50BB97P, 355220-43, WPX100BB97P, 355221-43, CBC-BB, 155170-43, FloPlus-10BB, 455905-43, EP-BB, 155548-43, EPM-BB, 155782-43, GAC-BB, 155153-43, R30-BB, RFC-BB, 155141-43, NCP-BB, 155398-43 Pureplus CTO10BB, PP10BB, PP10BB-CC, PP10BBGD, PPL10BB, PPW10BB Simpure CTO-F10B-5, MPP-F10B-5 Waterdrop WD-W80, WD-W88A, WD-W89, WD-WF99, WD-WF10F Whirlpool WHKF-GD25BB, WHKF-DWHBB, WHKFDWHBB Compatible Housings: Most brands’ 10″ x 4.5″ housings (Outer diameter 7″ at the top and 5.5″ at the bottom approx.): Ace Hardware, Aquaboon, Cuno, Flotec, Fulflo, Geekpure, Honeywell, Master Plumber, Omni, Sears, Teledyne, Water Pik, etc. American Plumber W15-PR, W10-PR (152014) APEC HBB-10, HBB-10-15, HBB-10-34, HBW-10, HBW-10-15, HBW-10-34, HBBK-10, CB1-SED10-BB, CB1-CAB10-BB Aquapure AP801T (5639203), AP801B (5639201), AP801 (5585701), AP801-C, AP801T-C, AP801-1.5-C Culligan WH-HD200-C, HD-950A GE GXWH35F, GXWH40L, GXWH30C, GXWH47J, GNWH38S Hydronix HF45, HF45-10BLBK34PR, HF45-10BLBK34, HF45-10CLBK10PR, HF45-10CLBK10, HF45-10BLBK10PR, HF45-10BLBK10, HF45-10BLBK15, HF45-10CLBK34 iSpring HB18B, WGB21B, WGB21BM, WGB21B-PB Pentair Pentek 150237, 150426, 166083, 166219 SimPure DB10, DB10C, DB10C-2, DB10P Whirlpool WHCF-WHPLBB Disclaimer: The lists are under continuous updating. Please contact us via eBay message if you don’t find your system model here. This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Applications: *Whole House Filtration This sediment water filters intercept all sands from raw water so there are no sands entering the water pipes in the house, which protects water lines as well as the faucets to prolong the lifespan and provide pure water for you. *Under-Sink Filtration You will no longer have to clean the strainer of faucets every month if installing this filter. All you need to do is change-out the filter regularly. Great for removing grits, clay soils, sands soil and iron scales, etc. *Extend Equipment Lifetime It can be as a pre-filter to remove the most of sediments from raw water before which entering the follow-up water treated system, such as the water softening process or other filters. *»Green» & Water Saving Rainwater/rainfall collected from the roof can be filtered and used for watering your garden, flushing toilets, doing laundries, washing cars, showers, washing dishes, or swimming water in pools. Package Includes: 2 Pack: 2 x Water Filter 4 Pack: 4 x Water Filter 6 Pack: 6 x Water Filter 8 Pack: 8 x Water Filter 10 Pack: 10 x Water Filter 12 Pack: 12 x Water Filter On May 16, 2024 at 22:55:30 PDT, seller added the following information:
20 Pack 400 GPD RO Membrane Maple Syrup Reverse Osmosis System Water Filter NSF
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Compatible Models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 Membrane Solutions ROULP-2812-200, ROULP-3012-300, ROULP-3012-500, ROULP-3012-600 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Filter Size: 12″ x 3″ (Fitting Standard 3″ ID Membrane Housings) Material: Polyamide Thin-Film Composite Capacity: 400 GPD (Gallons per Day) Micron Rating: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 100 psi Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Package Includes: 1 Pack: 1 x 400 GPD RO Membrane 2 Pack: 2 x 400 GPD RO Membrane 3 Pack: 3 x 400 GPD RO Membrane 4 Pack: 4 x 400 GPD RO Membrane 6 Pack: 6 x 400 GPD RO Membrane 10 Pack: 10 x 400 GPD RO Membrane 20 Pack: 20 x 400 GPD RO Membrane Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On Jul 31, 2024 at 01:14:21 PDT, seller added the following information:
20 Pack 500 GPD RO Membrane Maple Syrup Reverse Osmosis System Water Filter NSF
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Compatible Models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 Membrane Solutions ROULP-2812-200, ROULP-3012-300, ROULP-3012-400, ROULP-3012-600 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Filter Size: 12″ x 3″ (Fitting Standard 3″ ID Membrane Housings) Material: Polyamide Thin-Film Composite Capacity: 500 GPD (Gallons per Day) Micron Rating: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 100 psi Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Package Includes: 1 Pack: 1 x 500 GPD RO Membrane 2 Pack: 2 x 500 GPD RO Membrane 3 Pack: 3 x 500 GPD RO Membrane 4 Pack: 4 x 500 GPD RO Membrane 6 Pack: 6 x 500 GPD RO Membrane 10 Pack: 10 x 500 GPD RO Membrane 20 Pack: 20 x 500 GPD RO Membrane Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On Nov 28, 2023 at 21:25:46 PST, seller added the following information:
2 Pack 600 GPD RO Membrane Reverse Osmosis System Element Water Purifier Filter
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Compatible Models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 Membrane Solutions ROULP-2812-200, ROULP-3012-300, ROULP-3012-400, ROULP-3012-500 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Filter Size: 12″ x 3″ (Fitting Standard 3″ ID Membrane Housings) Material: Polyamide Thin-Film Composite Capacity: 600 GPD (Gallons per Day) Micron Rating: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 100 psi Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Package Includes: 2 x RO Membrane Filter Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On May 9, 2024 at 00:58:13 PDT, seller added the following information:
600 GPD RO Membrane Maple Syrup Reverse Osmosis System Water Filter Replacement
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Compatible Models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 Membrane Solutions ROULP-2812-200, ROULP-3012-300, ROULP-3012-400, ROULP-3012-500 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Filter Size: 12″ x 3″ (Fitting Standard 3″ ID Membrane Housings) Material: Polyamide Thin-Film Composite Capacity: 600 GPD (Gallons per Day) Micron Rating: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 100 psi Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Package Includes: 1 x RO Membrane Filter 1 x RO Housing Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On May 9, 2024 at 06:04:11 PDT, seller added the following information:
600 GPD RO Membrane Maple Syrup Reverse Osmosis System Sediment Filter Housing
600 GPD RO Membrane Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Warm Tips: Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Water Filter Housing High Compatibility: The whole house water filter housing suitable for universal 10 inch filter cartridge. The American NPT3/4″ inlet and outlet thread for most pipe and reverse osmosis system. Long Servie Time: Compare with other products without reinforcement design, the top mounting hole reinforced structure ensures that no water leaks from the mounting hole after long-term use. Easy Installation: Equipped with all the tools required for installation. The heavy-duty steel bracket, 4 screws, wrench, making the installation of the sediment filter and carbon filter easier. In addition, this water filter housing is designed with a pressure relief button (red button), which makes it easier to replace the filter cartridge after the pressure is released. Pleated Sediment Water Filter Material Safety: 10-inch sediment water filter cartridge made of 100% polypropylene material, tested by an independent third-party to meet NSF/ANSI 42 water standards. Non-shedding filter media, unique hot-melt technology used which averts re-contamination of the filtered water. Protect Water Equipment: Removes 99% of sediment from the water, rust, silt, sand, iron, and other undissolved particulates. Designed to be your first line of defense, protecting your water appliances, improving the water quality, and protecting kitchen and bathroom faucets and shower fittings from blockage. Washable & Reusable: The water filter cartridge replacement can be washable for multiple times, but it’s working effectively while the cartridge itself is not dirty, or following the change-out cycle we recommend to avert re-contamination of filtered water. Notes: 5 micron defaulted, if you need 20 micron or 50 micron sediment filter, please make a note.On Jan 3, 2024 at 20:47:46 PST, seller added the following information:
600 GPD RO Membrane Maple Syrup Reverse Osmosis Washable Pleated Filter Housing
600 GPD RO Membrane Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Warm Tips: Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Water Filter Housing High Compatibility: The whole house water filter housing suitable for universal 10 inch filter cartridge. The American NPT3/4″ inlet and outlet thread for most pipe and reverse osmosis system. Long Servie Time: Compare with other products without reinforcement design, the top mounting hole reinforced structure ensures that no water leaks from the mounting hole after long-term use. Easy Installation: Equipped with all the tools required for installation. The heavy-duty steel bracket, 4 screws, wrench, making the installation of the sediment filter and carbon filter easier. In addition, this water filter housing is designed with a pressure relief button (red button), which makes it easier to replace the filter cartridge after the pressure is released. Pleated Sediment Water Filter Material Safety: 10-inch sediment water filter cartridge made of 100% polypropylene material, tested by an independent third-party to meet NSF/ANSI 42 water standards. Non-shedding filter media, unique hot-melt technology used which averts re-contamination of the filtered water. Protect Water Equipment: Removes 99% of sediment from the water, rust, silt, sand, iron, and other undissolved particulates. Designed to be your first line of defense, protecting your water appliances, improving the water quality, and protecting kitchen and bathroom faucets and shower fittings from blockage. Washable & Reusable: The water filter cartridge replacement can be washable for multiple times, but it’s working effectively while the cartridge itself is not dirty, or following the change-out cycle we recommend to avert re-contamination of filtered water. Notes: 5 micron defaulted, if you need 20 micron or 50 micron sediment filter, please make a note.On Jan 2, 2024 at 20:29:12 PST, seller added the following information:
400/500/600 GPD RO Membrane Home Maple Syrup Reverse Osmosis System Water Filter
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Compatible Models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Filter Size: 12″ x 3″ (Fitting Standard 3″ ID Membrane Housings) Material: Polyamide Thin-Film Composite Capacity: 400, 500, 600 GPD (Gallons per Day) Micron Rating: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 100 psi Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Package Includes: 400GPD RO Membrane: 1 x 400GPD RO Membrane 400GPD RO with Housing: 1 x 400GPD RO Membrane 1 x Housing 1 x Wrench 3 x Fitting 500GPD RO Membrane: 1 x 500GPD RO Membrane 500GPD RO with Housing: 1 x 500GPD RO Membrane 1 x Housing 1 x Wrench 3 x Fitting 600GPD RO Membrane: 1 x 500GPD RO Membrane 600GPD RO with Housing: 1 x 600GPD RO Membrane 1 x Housing 1 x Wrench 3 x Fitting Housing: 1 x Housing 1 x Wrench 3 x Fitting Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On May 9, 2024 at 02:15:20 PDT, seller added the following information:
