1 set of replacement filters with following : 1 x Pleated Filter 10 Micron, size 10 inch x4.5 inch 10 Micron Pleated Polypropylene Sediment Filter Size 9 7/8 inch x 4.5 inch Used to Remove small particles & suspended matter such as silt, rust, sand, algae, sediment, scale particles from water. Meets FDA requirements for food and beverage contact Washable filter / minimize the filtration cost Operation Temperature: 40°F to 140°F No surface binders to reduce flow and increase change-out frequency. 1 x 10 Inch Big Blue 5 Micron PP Sediment Filter Three-layers structure cartridge, High contaminant holding capacity. 100% PP Polypropylene for compatibility with a wide range of process fluids. 5 Micron, Micro-Denier™ melt-blown filtration fiber, high removal ratings. Formed by thermal bond without use of any binders and adhesives. Certificated by NSF42 and FDA CFR Title 21. (Not printed on the filter label) Maximum operating pressure: 125 PSI Operating Temperature Range: 40-100°F Dimensions: 10 inch x 4.5 inch Maximum Flow Capacity: 1-15GPM* * Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions. 1 x 10 Inch Big Blue GAC carbon Filter GAC 10 inch Coconut shell Carbon Filter – Size 4.5 inch x 9 7/8 inch Removes chlorine, turbidity, bad taste & odors, sediment, dirt, and THMS from water. Thick Wall Coconut Base Carbon Filter Media – 100% coconut shell carbon Designed For maximum contact between the water and carbon. 5 Micron nominal filter membrane included to prevent carbon fines to pass from the filter to your drinking water. Operation Temperature: 40°F to 125°F Low pressure drop across filter stage. Total 3 filters, each individually wrapped.