Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Compatible Models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 Membrane Solutions ROULP-2812-200, ROULP-3012-300, ROULP-3012-400, ROULP-3012-500 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Filter Size: 12″ x 3″ (Fitting Standard 3″ ID Membrane Housings) Material: Polyamide Thin-Film Composite Capacity: 600 GPD (Gallons per Day) Micron Rating: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 100 psi Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Package Includes: 1 x RO Membrane Filter 1 x RO Housing Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On May 9, 2024 at 06:04:11 PDT, seller added the following information:
600 GPD RO Membrane Maple Syrup Reverse Osmosis System Sediment Filter Housing
600 GPD RO Membrane Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Warm Tips: Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Water Filter Housing High Compatibility: The whole house water filter housing suitable for universal 10 inch filter cartridge. The American NPT3/4″ inlet and outlet thread for most pipe and reverse osmosis system. Long Servie Time: Compare with other products without reinforcement design, the top mounting hole reinforced structure ensures that no water leaks from the mounting hole after long-term use. Easy Installation: Equipped with all the tools required for installation. The heavy-duty steel bracket, 4 screws, wrench, making the installation of the sediment filter and carbon filter easier. In addition, this water filter housing is designed with a pressure relief button (red button), which makes it easier to replace the filter cartridge after the pressure is released. Pleated Sediment Water Filter Material Safety: 10-inch sediment water filter cartridge made of 100% polypropylene material, tested by an independent third-party to meet NSF/ANSI 42 water standards. Non-shedding filter media, unique hot-melt technology used which averts re-contamination of the filtered water. Protect Water Equipment: Removes 99% of sediment from the water, rust, silt, sand, iron, and other undissolved particulates. Designed to be your first line of defense, protecting your water appliances, improving the water quality, and protecting kitchen and bathroom faucets and shower fittings from blockage. Washable & Reusable: The water filter cartridge replacement can be washable for multiple times, but it’s working effectively while the cartridge itself is not dirty, or following the change-out cycle we recommend to avert re-contamination of filtered water. Notes: 5 micron defaulted, if you need 20 micron or 50 micron sediment filter, please make a note.On Jan 3, 2024 at 20:47:46 PST, seller added the following information:
600 GPD RO Membrane Maple Syrup Reverse Osmosis Washable Pleated Filter Housing
600 GPD RO Membrane Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Warm Tips: Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Water Filter Housing High Compatibility: The whole house water filter housing suitable for universal 10 inch filter cartridge. The American NPT3/4″ inlet and outlet thread for most pipe and reverse osmosis system. Long Servie Time: Compare with other products without reinforcement design, the top mounting hole reinforced structure ensures that no water leaks from the mounting hole after long-term use. Easy Installation: Equipped with all the tools required for installation. The heavy-duty steel bracket, 4 screws, wrench, making the installation of the sediment filter and carbon filter easier. In addition, this water filter housing is designed with a pressure relief button (red button), which makes it easier to replace the filter cartridge after the pressure is released. Pleated Sediment Water Filter Material Safety: 10-inch sediment water filter cartridge made of 100% polypropylene material, tested by an independent third-party to meet NSF/ANSI 42 water standards. Non-shedding filter media, unique hot-melt technology used which averts re-contamination of the filtered water. Protect Water Equipment: Removes 99% of sediment from the water, rust, silt, sand, iron, and other undissolved particulates. Designed to be your first line of defense, protecting your water appliances, improving the water quality, and protecting kitchen and bathroom faucets and shower fittings from blockage. Washable & Reusable: The water filter cartridge replacement can be washable for multiple times, but it’s working effectively while the cartridge itself is not dirty, or following the change-out cycle we recommend to avert re-contamination of filtered water. Notes: 5 micron defaulted, if you need 20 micron or 50 micron sediment filter, please make a note.On Jan 2, 2024 at 20:29:12 PST, seller added the following information:
400/500/600 GPD RO Membrane Home Maple Syrup Reverse Osmosis System Water Filter
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Compatible Models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Filter Size: 12″ x 3″ (Fitting Standard 3″ ID Membrane Housings) Material: Polyamide Thin-Film Composite Capacity: 400, 500, 600 GPD (Gallons per Day) Micron Rating: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 100 psi Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Package Includes: 400GPD RO Membrane: 1 x 400GPD RO Membrane 400GPD RO with Housing: 1 x 400GPD RO Membrane 1 x Housing 1 x Wrench 3 x Fitting 500GPD RO Membrane: 1 x 500GPD RO Membrane 500GPD RO with Housing: 1 x 500GPD RO Membrane 1 x Housing 1 x Wrench 3 x Fitting 600GPD RO Membrane: 1 x 500GPD RO Membrane 600GPD RO with Housing: 1 x 600GPD RO Membrane 1 x Housing 1 x Wrench 3 x Fitting Housing: 1 x Housing 1 x Wrench 3 x Fitting Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On May 9, 2024 at 02:15:20 PDT, seller added the following information:
4 Pack 600 GPD RO Membrane Drink Water Reverse Osmosis System Filter Replacement
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Compatible Models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 Membrane Solutions ROULP-2812-200, ROULP-3012-300, ROULP-3012-400, ROULP-3012-500 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Filter Size: 12″ x 3″ (Fitting Standard 3″ ID Membrane Housings) Material: Polyamide Thin-Film Composite Capacity: 600 GPD (Gallons per Day) Micron Rating: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 100 psi Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Package Includes: 1 Pack: 1 x 600 GPD RO Membrane 2 Pack: 2 x 600 GPD RO Membrane 3 Pack: 3 x 600 GPD RO Membrane 4 Pack: 4 x 600 GPD RO Membrane Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On May 9, 2024 at 02:15:29 PDT, seller added the following information:
2 Pack 36/50/75/100/150/400/500/600 GPD Reverse Osmosis RO Membrane Water Filter
Wide Compatibility With the industry-standard 12″ x 2″ / 12″ x 3″ size, this high capacity RO element fits most standard 1812/3012 RO housing for the light commercial reverse osmosis water systems. Premium Material Our RO membranes deliver consistent performance for all users with advanced membrane technology and automated spiral-wound fabrication. Deep Filtration The RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Authorized Certification Our Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance with high permeate flow, tested by an independent third-party to meet NSF/ANSI 42/58 standards, providing safe-clean drinking water. Long Life Span Our membrane elements are shipped dry in an original sealed package for convenient handling and long shelf-life. The membrane normally lasts about 2-3 years depending on your source water quality. DIY RO System Membrane Solutions Rreverse osmosis membrane for home drinking water treatment or maple syrup filter systems are among the most reliable and consistent elements in the industry. Important Information *It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. *The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. *Keep elements moist at all times after initial wetting. *To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. *The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. *Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Note Please check and confirm your choice of «Model» and «Pack». For example, if you need 2 pieces of 100 GPD RO membrane filters, please choose «100 GPD» and «2 Pack». On May 28, 2024 at 21:33:55 PDT, seller added the following information:
3 Pack 600 GPD RO Membrane Home Reverse Osmosis System Water Filter Replacement
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Compatible Models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 Membrane Solutions ROULP-2812-200, ROULP-3012-300, ROULP-3012-400, ROULP-3012-500 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Filter Size: 12″ x 3″ (Fitting Standard 3″ ID Membrane Housings) Material: Polyamide Thin-Film Composite Capacity: 600 GPD (Gallons per Day) Micron Rating: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 100 psi Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Package Includes: 3 x RO Membrane Filter Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On May 9, 2024 at 00:33:01 PDT, seller added the following information:
600 GPD RO Membrane Maple Syrup Reverse Osmosis Filtration System Cartridges Set
600 GPD RO Membrane Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Warm Tips: Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Water Filter Housing High Compatibility: The whole house water filter housing suitable for universal 10 inch filter cartridge. The American NPT3/4″ inlet and outlet thread for most pipe and reverse osmosis system. Long Servie Time: Compare with other products without reinforcement design, the top mounting hole reinforced structure ensures that no water leaks from the mounting hole after long-term use. Easy Installation: Equipped with all the tools required for installation. The heavy-duty steel bracket, 4 screws, wrench, making the installation of the sediment filter and carbon filter easier. In addition, this water filter housing is designed with a pressure relief button (red button), which makes it easier to replace the filter cartridge after the pressure is released. Melt-Blow Sediment Water Filter Material Safety: 10-inch sediment water filter cartridge made of 100% polypropylene material, tested by an independent third-party to meet NSF/ANSI 42 water standards. Non-shedding filter media, unique hot-melt technology used which averts re-contamination of the filtered water. Protect Water Equipment: Removes 99% of sediment from the water, rust, silt, sand, iron, and other undissolved particulates. Designed to be your first line of defense, protecting your water appliances, improving the water quality, and protecting kitchen and bathroom faucets and shower fittings from blockage. Notes: 5 micron defaulted, if you need 1 micron, 10 micron, 20 micron, 25 micron or 50 micron sediment filter, please make a note.On Jan 2, 2024 at 20:32:18 PST, seller added the following information:
600 GPD RO Membrane Maple Syrup Reverse Osmosis System Water Filter Housing Kit
600 GPD RO Membrane Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Warm Tips: Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Water Filter Housing High Compatibility: The whole house water filter housing suitable for universal 10 inch filter cartridge. The American NPT3/4″ inlet and outlet thread for most pipe and reverse osmosis system. Long Servie Time: Compare with other products without reinforcement design, the top mounting hole reinforced structure ensures that no water leaks from the mounting hole after long-term use. Easy Installation: Equipped with all the tools required for installation. The heavy-duty steel bracket, 4 screws, wrench, making the installation of the sediment filter and carbon filter easier. In addition, this water filter housing is designed with a pressure relief button (red button), which makes it easier to replace the filter cartridge after the pressure is released. Melt-Blow Sediment Water Filter Material Safety: 10-inch sediment water filter cartridge made of 100% polypropylene material, tested by an independent third-party to meet NSF/ANSI 42 water standards. Non-shedding filter media, unique hot-melt technology used which averts re-contamination of the filtered water. Protect Water Equipment: Removes 99% of sediment from the water, rust, silt, sand, iron, and other undissolved particulates. Designed to be your first line of defense, protecting your water appliances, improving the water quality, and protecting kitchen and bathroom faucets and shower fittings from blockage. Notes: 5 micron defaulted, if you need 1 micron, 10 micron, 20 micron, 25 micron or 50 micron sediment filter, please make a note.On Jan 3, 2024 at 23:04:49 PST, seller added the following information:
600 GPD RO Membrane Maple Syrup Water Filter Reverse Osmosis System Replacement
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Compatible Models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 Membrane Solutions ROULP-2812-200, ROULP-3012-300, ROULP-3012-400, ROULP-3012-500 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Filter Size: 12″ x 3″ (Fitting Standard 3″ ID Membrane Housings) Material: Polyamide Thin-Film Composite Micron Rating: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 100 psi 600 Gallon Per Day: Membrane Solutions high-quality reverse osmosis membrane can produce 600 gallons purified water per day (25 gallons / 94.63 liters per hour). 8 glasses of 8oz cups of water are recommended 1 gallon. You can get a gallon of water in about 3 minutes. You just need to open the faucet of the RO purifier using this RO membrane, you can get drinking water. Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Warm Tips: Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Package Includes: RO Membrane: 1 x 600 GPD RO Membrane RO Membrane+Housing Kit: 1 x 600 GPD RO Membrane 1 x Housing 1 x Wrench 3 x Quick Connect Fitting Housing+Wrench+Fittings: 1 x Housing 1 x Wrench 3 x Quick Connect Fitting Housing: 1 x Housing Wrench: 1 x Wrench Fittings: 3 x Quick Connect FittingOn Jul 31, 2024 at 01:43:36 PDT, seller added the following information:
