𝐓𝐫𝐮𝐬𝐭𝐞𝐝 𝐜𝐞𝐫𝐭𝐢𝐟𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬: Waterdrop G3P600 reverse osmosis system is certified against NSF/ANSI 58 for TDS reduction and NSF/ANSI 372 certified for lead-free material. Also it has been tested and certified against NSF 42 to reduce chlorine, bad taste and odor.
High Quality 600 GPD RO Membrane – Polyamide Filter Replacement Cartridge
Manufactured from Polyamide Thin-Film Composite material that is food-grade, non-toxic, and BPA-free. Designed for a variety of RO systems including but not limited to Key Features Superior Quality.
600 GPD RO Reverse Osmosis Membrane Housing Set Kit Water Filtration Maple Syrup
Filter life about 2-3 years.
2 Pack 600 GPD RO Membrane Reverse Osmosis System Element Water Purifier Filter
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Compatible Models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 Membrane Solutions ROULP-2812-200, ROULP-3012-300, ROULP-3012-400, ROULP-3012-500 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Filter Size: 12″ x 3″ (Fitting Standard 3″ ID Membrane Housings) Material: Polyamide Thin-Film Composite Capacity: 600 GPD (Gallons per Day) Micron Rating: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 100 psi Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Package Includes: 2 x RO Membrane Filter Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On May 9, 2024 at 00:58:13 PDT, seller added the following information:
600 GPD RO Membrane Maple Syrup Reverse Osmosis System Water Filter Replacement
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Compatible Models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 Membrane Solutions ROULP-2812-200, ROULP-3012-300, ROULP-3012-400, ROULP-3012-500 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Filter Size: 12″ x 3″ (Fitting Standard 3″ ID Membrane Housings) Material: Polyamide Thin-Film Composite Capacity: 600 GPD (Gallons per Day) Micron Rating: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 100 psi Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Package Includes: 1 x RO Membrane Filter 1 x RO Housing Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On May 9, 2024 at 06:04:11 PDT, seller added the following information:
600 GPD RO Membrane Maple Syrup Reverse Osmosis System Sediment Filter Housing
600 GPD RO Membrane Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Warm Tips: Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Water Filter Housing High Compatibility: The whole house water filter housing suitable for universal 10 inch filter cartridge. The American NPT3/4″ inlet and outlet thread for most pipe and reverse osmosis system. Long Servie Time: Compare with other products without reinforcement design, the top mounting hole reinforced structure ensures that no water leaks from the mounting hole after long-term use. Easy Installation: Equipped with all the tools required for installation. The heavy-duty steel bracket, 4 screws, wrench, making the installation of the sediment filter and carbon filter easier. In addition, this water filter housing is designed with a pressure relief button (red button), which makes it easier to replace the filter cartridge after the pressure is released. Pleated Sediment Water Filter Material Safety: 10-inch sediment water filter cartridge made of 100% polypropylene material, tested by an independent third-party to meet NSF/ANSI 42 water standards. Non-shedding filter media, unique hot-melt technology used which averts re-contamination of the filtered water. Protect Water Equipment: Removes 99% of sediment from the water, rust, silt, sand, iron, and other undissolved particulates. Designed to be your first line of defense, protecting your water appliances, improving the water quality, and protecting kitchen and bathroom faucets and shower fittings from blockage. Washable & Reusable: The water filter cartridge replacement can be washable for multiple times, but it’s working effectively while the cartridge itself is not dirty, or following the change-out cycle we recommend to avert re-contamination of filtered water. Notes: 5 micron defaulted, if you need 20 micron or 50 micron sediment filter, please make a note.On Jan 3, 2024 at 20:47:46 PST, seller added the following information:
600 GPD RO Membrane Maple Syrup Reverse Osmosis Washable Pleated Filter Housing
600 GPD RO Membrane Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Warm Tips: Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Water Filter Housing High Compatibility: The whole house water filter housing suitable for universal 10 inch filter cartridge. The American NPT3/4″ inlet and outlet thread for most pipe and reverse osmosis system. Long Servie Time: Compare with other products without reinforcement design, the top mounting hole reinforced structure ensures that no water leaks from the mounting hole after long-term use. Easy Installation: Equipped with all the tools required for installation. The heavy-duty steel bracket, 4 screws, wrench, making the installation of the sediment filter and carbon filter easier. In addition, this water filter housing is designed with a pressure relief button (red button), which makes it easier to replace the filter cartridge after the pressure is released. Pleated Sediment Water Filter Material Safety: 10-inch sediment water filter cartridge made of 100% polypropylene material, tested by an independent third-party to meet NSF/ANSI 42 water standards. Non-shedding filter media, unique hot-melt technology used which averts re-contamination of the filtered water. Protect Water Equipment: Removes 99% of sediment from the water, rust, silt, sand, iron, and other undissolved particulates. Designed to be your first line of defense, protecting your water appliances, improving the water quality, and protecting kitchen and bathroom faucets and shower fittings from blockage. Washable & Reusable: The water filter cartridge replacement can be washable for multiple times, but it’s working effectively while the cartridge itself is not dirty, or following the change-out cycle we recommend to avert re-contamination of filtered water. Notes: 5 micron defaulted, if you need 20 micron or 50 micron sediment filter, please make a note.On Jan 2, 2024 at 20:29:12 PST, seller added the following information:
Ontulor Reverse Osmosis System, 6-in-1 Tankless Filter Portable Water Purifier
4 Pack 600 GPD RO Membrane Drink Water Reverse Osmosis System Filter Replacement
Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Compatible Models: AQUANOVA TW30-2812-200G AXEON TF-3012-500 Express Water FLTMEM300, FLTMEM600 HUINING EM-RO-3012-400, EM-RO-3012-500 Membrane Solutions ROULP-2812-200, ROULP-3012-300, ROULP-3012-400, ROULP-3012-500 MewMore ROM-ES-300, ROM-ES-400 MOPUEHEL HRE 3012-400 SpiroPure SP-RO-400R Vegebe ROM-ES-300, ROM-ES-400 *The list is under continuous updating. Please contact us via eBay message if you don’t find your system model here. Disclaimer: This product is a generic item that is designed to replace the original part. Any brand names or logos are the registered trademarks of their respective owners. Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Specifications: Filter Size: 12″ x 3″ (Fitting Standard 3″ ID Membrane Housings) Material: Polyamide Thin-Film Composite Capacity: 600 GPD (Gallons per Day) Micron Rating: 0.0001 μm Salt Rejection Rate: 97% TDS Removal Rate: 99% Feed pressure: 100 psi Long-Life: The membrane element has a life expectancy between 2 to 3 years, based on average feedwater quality, temperature, and incoming water pressure. On-Demand Support: Assistance is available from our experts, ready to answer any of your questions about your RO membrane. Have a concern or question? American based customer support is available for the life of the product. Welcome to the Membrane Solutions family. Package Includes: 1 Pack: 1 x 600 GPD RO Membrane 2 Pack: 2 x 600 GPD RO Membrane 3 Pack: 3 x 600 GPD RO Membrane 4 Pack: 4 x 600 GPD RO Membrane Warm Tips: It is recommended that systems using these elements rinse the elements for 24 hours, prior to first use, to meet NSF/ANSI 58 Standard. The first full tank of permeate must be discarded. Do not use this initial permeate for drinking water or food preparation. Keep elements moist at all times after initial wetting. To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative before use. The membrane shows some resistance to short-term attack by chlorine (hypochlorite). Continuous exposure, however, may damage the membrane and should be avoided. Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature.On May 9, 2024 at 02:15:29 PDT, seller added the following information:
600 GPD RO Membrane Maple Syrup Reverse Osmosis Filtration System Cartridges Set
600 GPD RO Membrane Material Safety: Membrane Solutions Reverse Osmosis (RO) membranes are made from 100% food-grade Thin Film Composite (TFC) material for ultimate purification performance, with high permeate flow and salt rejection, tested by an independent third-party to meet NSF/ANSI 58 water standards to ensure a reduction in contaminants, providing safe-clean drinking water. Healthy Drinking: Membrane Solutions RO membrane with a high 97% stabilized salt rejection rate. Hundreds of impurities are reduced by over 99% through the 0.0001-micron TFC membrane layer, including heavy metals (fluoride, calcium, magnesium, lead, colloids, chromium, and nitrates), organic materials, and harmful minerals, including other soluble salts found in water resources. Universal Membrane Size: With the industry-standard 12″ x 3″ size, this high capacity RO element fits most standard 2812/3012 RO housing for the light commercial reverse osmosis water systems. Warm Tips: Recommend work pressure is 100 psi when using this product in a Maple Syrup reverse osmosis system. And we suggest heating and maintaining the raw sap at 104°F(40°C) to prevent clog on the membrane while keeping it under 113°F(45°C) to avoid damage to the membrane due to over-high temperature. Water Filter Housing High Compatibility: The whole house water filter housing suitable for universal 10 inch filter cartridge. The American NPT3/4″ inlet and outlet thread for most pipe and reverse osmosis system. Long Servie Time: Compare with other products without reinforcement design, the top mounting hole reinforced structure ensures that no water leaks from the mounting hole after long-term use. Easy Installation: Equipped with all the tools required for installation. The heavy-duty steel bracket, 4 screws, wrench, making the installation of the sediment filter and carbon filter easier. In addition, this water filter housing is designed with a pressure relief button (red button), which makes it easier to replace the filter cartridge after the pressure is released. Melt-Blow Sediment Water Filter Material Safety: 10-inch sediment water filter cartridge made of 100% polypropylene material, tested by an independent third-party to meet NSF/ANSI 42 water standards. Non-shedding filter media, unique hot-melt technology used which averts re-contamination of the filtered water. Protect Water Equipment: Removes 99% of sediment from the water, rust, silt, sand, iron, and other undissolved particulates. Designed to be your first line of defense, protecting your water appliances, improving the water quality, and protecting kitchen and bathroom faucets and shower fittings from blockage. Notes: 5 micron defaulted, if you need 1 micron, 10 micron, 20 micron, 25 micron or 50 micron sediment filter, please make a note.On Jan 2, 2024 at 20:32:18 PST, seller added the following information:
