6 Pack archivos | Página 2 de 14 | Blue Royal

[New]6 Pack-Refrigerator Ice Replacement W10413²645A EDR2²RXD1 Filter

【Product Features】●everydrop Water Filter 2 is the only filter approved by: Whirlpool, Maytag, Amana, KitchenAid and Jenn Air brands.●NSF certified to reduce 28 contaminants including lead, pesticides and pharmaceuticals●For clean, fresh-tasting water, replace your everydrop Water Filter every 6 months.●Warning: Damage caused by a non-genuine everydrop Water Filter is not covered under Whirlpool Corporation’s warranty●Check your previous filter number to confirm compatibility with your refrigerator Model N/A Color White Batteries Included? No Batteries Required? No Item Weight 6.4 ounces Product Dimensions 2.5″D x 2.5″W x 8.69″H Special Features Removes Odor Compatible Model Whirlpool WRX986SIHZ00 Bran.

[New]6 Pack-Refrigerator Ice Replacement W10413²645A EDR2²RXD1 Filter

【Product Features】●everydrop Water Filter 2 is the only filter approved by: Whirlpool, Maytag, Amana, KitchenAid and Jenn Air brands.●NSF certified to reduce 28 contaminants including lead, pesticides and pharmaceuticals●For clean, fresh-tasting water, replace your everydrop Water Filter every 6 months.●Warning: Damage caused by a non-genuine everydrop Water Filter is not covered under Whirlpool Corporation’s warranty●Check your previous filter number to confirm compatibility with your refrigerator Model N/A Color White Batteries Included? No Batteries Required? No Item Weight 6.4 ounces Product Dimensions 2.5″D x 2.5″W x 8.69″H Special Features Removes Odor Compatible Model Whirlpool WRX986SIHZ00 Bran.

(1-6 Pack) 10″ Hardness Reduction Water Softening Cation Resin Filters for WH

1 set of replacement filters with following : (1-6) x Cation Resin Cartridge Filter Size 9 7/8 inch x 2.5 inch – Fits most standard 10 inch size housings and most reverse osmosis systems.Filter Media: Cation Resin Capacity : 750 grains Maximum Recommended Flow Rate: 2.5 to 5 GPM (depends on incoming water pressure). Operational Temperature Range: 40°F to 100°F Maximum pressure: 125 PSI (8.6 bar) Minimum pressure: 20 PSI (1.4 bar) 5-Micron nominal rating. Cartridge capacity dimensions – ID: 30mm OD: 70mm Reduces Total Dissolved Solids (TDS) and hardness, can also be used as a pre-filter to prevent build-up of scale on sensitive equipment. End Caps: Polypropylene Inner/Outer Wraps: Polyolefin Netting: Polyethylene All filters are individually wrapped. Detailed Description For water hardness reduction, our Cation Resin Filter softens your water by releasing Hydrogen (H+) ions or other positively charged ions in exchange for impurities present in the water. The process involves passing water containing hardness mineral ions, namely calcium (Ca2+) and magnesium (Mg2+) through a column containing a strongly cation exchange resin in the sodium (Na+) form (i.e. the exchangeable cations are sodium). The calcium and magnesium ions are exchanged for an equivalent number of sodium ions. The resin, once exhausted, (i.e. all the available sodium ions have been exchanged) must be re-charged. This entails passing a solution containing a high concentration of sodium salts, such as brine (sodium chloride), through the ion exchange resin in a process known as regeneration. 1 x Pleated Sediment Filter Size 9 7/8″ x 2.5″ – Fits most standard 10″ size housings and most reverse osmosis systems.Pleated Polypropylene Sediment Filter 5 micron Used to Remove small particles & suspended matter such as silt, rust, sand, algae, sediment, scale particles from water. Meets FDA requirements for food and beverage contact. Washable filter to help minimize the filtration cost. Operation Temperature: 40°F to 140°F. Low surface area, lower pressure drop. –> 1 x GAC 10″ Coconut shell Carbon Filter Size 9 7/8″ x 2.5″ – Fits most standard 10″ size housings and most reverse osmosis systems. Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water. Thick Wall Coconut Base Carbon Filter Media – 100% coconut shell carbon Designed For maximum contact between the water and carbon. 1 Micron filter membrane included to prevent carbon fines to pass from the filter to your drinking water. Operation Temperature: 40°F to 125°F 1 x CTO Carbon Block Filter Size 9 7/8″ x 2.5″ Fits most standard 10″ size housings and most reverse osmosis systems. Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water. 1 x Standard Inline Carbon Cartridges Dimensions: 2″ x 10″ – Fits standard Reverse Osmosis Systems – 10 Micron Nominal Removes Chlorine , Bad Taste & Odor ,Turbidity ,Sediment ,THMs and Dirt. Helps to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers Max Flow: 0.5 GPM Max Pressure: 125 PSI Max Temperature: 100°F Inlet/Outlet: 1/4″ NPTF thread (fitting is required) 1 X Reverse Osmosis Membrane NSF Certified. 50 GPD R.O. Membrane at 60 PSI We Suggest to change your membrane every 2 year To remove particles down to 1/10,000 of a micron ( which is 98% of impurities including Organic, inorganic And chemicals). –> 1 X Inline Mineral/Infrared/Alkaline Cartridge Dimensions: 2″ x 10″ – Fits all Reverse Osmosis Systems. Filter Service Life 1500 Gallons (5676 Liter) Max Flow: 0.75 GPM Max Pressure: 125 PSI (8.6 Bar) Max Temperature: 100°F Inlet/Outlet: 1/4″ NPT –> 1 X Inline Remineralization Cartridge Dimensions: 2″ x 10″ – Fits all Reverse Osmosis Systems Filter Service Life: 1500 Gallons ( 5676 Liter) Max Flow: 0.75 GPM Max Pressure: 125 PSI (8.6 Bar) Max Temperature: 100°F Inlet/Outlet: 1/4″ NPT –> Total 1-6 filter(s) individually wrapped. –> –> –> –> –> –> –>

(1-6 Pack) 10″ Hardness Reduction Water Softening Cation Resin Filters for WH

1 set of replacement filters with following : (1-6) x Cation Resin Cartridge Filter Size 9 7/8 inch x 2.5 inch – Fits most standard 10 inch size housings and most reverse osmosis systems.Filter Media: Cation Resin Capacity : 750 grains Maximum Recommended Flow Rate: 2.5 to 5 GPM (depends on incoming water pressure). Operational Temperature Range: 40°F to 100°F Maximum pressure: 125 PSI (8.6 bar) Minimum pressure: 20 PSI (1.4 bar) 5-Micron nominal rating. Cartridge capacity dimensions – ID: 30mm OD: 70mm Reduces Total Dissolved Solids (TDS) and hardness, can also be used as a pre-filter to prevent build-up of scale on sensitive equipment. End Caps: Polypropylene Inner/Outer Wraps: Polyolefin Netting: Polyethylene All filters are individually wrapped. Detailed Description For water hardness reduction, our Cation Resin Filter softens your water by releasing Hydrogen (H+) ions or other positively charged ions in exchange for impurities present in the water. The process involves passing water containing hardness mineral ions, namely calcium (Ca2+) and magnesium (Mg2+) through a column containing a strongly cation exchange resin in the sodium (Na+) form (i.e. the exchangeable cations are sodium). The calcium and magnesium ions are exchanged for an equivalent number of sodium ions. The resin, once exhausted, (i.e. all the available sodium ions have been exchanged) must be re-charged. This entails passing a solution containing a high concentration of sodium salts, such as brine (sodium chloride), through the ion exchange resin in a process known as regeneration. 1 x Pleated Sediment Filter Size 9 7/8″ x 2.5″ – Fits most standard 10″ size housings and most reverse osmosis systems.Pleated Polypropylene Sediment Filter 5 micron Used to Remove small particles & suspended matter such as silt, rust, sand, algae, sediment, scale particles from water. Meets FDA requirements for food and beverage contact. Washable filter to help minimize the filtration cost. Operation Temperature: 40°F to 140°F. Low surface area, lower pressure drop. –> 1 x GAC 10″ Coconut shell Carbon Filter Size 9 7/8″ x 2.5″ – Fits most standard 10″ size housings and most reverse osmosis systems. Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water. Thick Wall Coconut Base Carbon Filter Media – 100% coconut shell carbon Designed For maximum contact between the water and carbon. 1 Micron filter membrane included to prevent carbon fines to pass from the filter to your drinking water. Operation Temperature: 40°F to 125°F 1 x CTO Carbon Block Filter Size 9 7/8″ x 2.5″ Fits most standard 10″ size housings and most reverse osmosis systems. Remove small particles and carbon fines may pass from second stage & to ensure 100% of chlorine removal from water. 1 x Standard Inline Carbon Cartridges Dimensions: 2″ x 10″ – Fits standard Reverse Osmosis Systems – 10 Micron Nominal Removes Chlorine , Bad Taste & Odor ,Turbidity ,Sediment ,THMs and Dirt. Helps to polish the taste of reverse osmosis water (Last Stage), Ice maker Refrigerators Drinking Coolers Max Flow: 0.5 GPM Max Pressure: 125 PSI Max Temperature: 100°F Inlet/Outlet: 1/4″ NPTF thread (fitting is required) 1 X Reverse Osmosis Membrane NSF Certified. 50 GPD R.O. Membrane at 60 PSI We Suggest to change your membrane every 2 year To remove particles down to 1/10,000 of a micron ( which is 98% of impurities including Organic, inorganic And chemicals). –> 1 X Inline Mineral/Infrared/Alkaline Cartridge Dimensions: 2″ x 10″ – Fits all Reverse Osmosis Systems. Filter Service Life 1500 Gallons (5676 Liter) Max Flow: 0.75 GPM Max Pressure: 125 PSI (8.6 Bar) Max Temperature: 100°F Inlet/Outlet: 1/4″ NPT –> 1 X Inline Remineralization Cartridge Dimensions: 2″ x 10″ – Fits all Reverse Osmosis Systems Filter Service Life: 1500 Gallons ( 5676 Liter) Max Flow: 0.75 GPM Max Pressure: 125 PSI (8.6 Bar) Max Temperature: 100°F Inlet/Outlet: 1/4″ NPT –> Total 1-6 filter(s) individually wrapped. –> –> –> –> –> –> –>

6 Pack Grooved Sediment 5 Micron Water Filters Cartridge 2.5″ x 10″

Grooved Sediment Water Filter Cartridge by Ronaqua 10″x 2.5″, Four Layers of Filtration, Removes Sand, Dirt, Silt, Rust, made from Polypropylene 6 Pack Product Description Industry Standard 10-inch 5 Micron Sediment Filter – Used for effectively removing most sediments, cysts, chlorine, and fluorides. The grooved surface area allows greater dirt holding capacity and a longer lifespan. This filter is ideal for a standard Reverse Osmosis Water Filtration Unit or any type of Water Filtration Unit with a 10 inch housing and WELL-MATCHED Models of Cartridges: Dupont PFC5002,DuPont WFPFC5002, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Hydronix SGC-25-1005, Culligan P5, P5-D, P5A, OmniFilter RS14, RS14-SD, RS14-DS and RS14-SS, GE FXUSC, Aquaboon 25S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05 Product Lifespan: Replace two or three times a year – depending on your water quality This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations. Dimensions: 10 inches x 2.5 inches (24.4 cm x 6.35 cm) WELL-FIT FOLLOWING HOUSINGS AND REVERS OSMOSIS WATER FILTER SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2; iSpring RCC7AK, Global Water RO-505, RO5DX, APEC ROES-50-A, SimPure RPWROKSN075HDB Polypropylene Multi-layer Gradient Filtration Cartridge A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters. This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. The main difference between a Grooved Sediment Filter and a regular Sediment Filter is the surface area; the Grooved Sediment has a larger surface area, which contributes to a longer life span of the filter and thus better filtration. Outer Zone Mid Zone Inner Zone Innermost Zone These Sediment Water Filters Intercept all Following Impurities Rust & Corrosion- Rust is a type of corrosion. Corrosion is the process by which certain materials, metals and non-metals, deteriorate as a result of oxidation. Rusting is oxidation of iron in the presence of air and moisture. … Corrosion requires surface exposure to air or chemicals Coarse Sand is our concrete sand that is washed and screened to a larger grit than our Fine Washed Sand (masonry sand). Coarse Sand is used with aggregate, water, and cement in the production of ready-mix concrete. Hard Scale causes a variety of problems in the home. Stains are probably the most noticeable result of hard water scale. Stains appear in toilets, sinks, and showers. Some hardwater scale are less noticeable, such as scale build up in pipes and in appliances which can cause costly repairs or the need to replace appliances. Fine Sand is very fine, screened sand that is typically tan in color. This type of sand is commonly used as base sand for above ground swimming pools, paving stones, sidewalk blocks and retaining walls. It is alternately used in stucco and cement applications. Particles is a small localized object to which can be ascribed several physical or chemical properties, such as volume, density, or mass. They vary greatly in size or quantity, from subatomic particles like the electron, to microscopic particles like atoms and molecules, to macroscopic particles like powders and other granular materials. Particles can also be used to create scientific models of even larger objects depending on their density, such as humans moving in a crowd or celestial bodies in motion. Sediment is a naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone (sedimentary rocks) through lithification. Sediments are most often transported by water (fluvial processes), but also wind (aeolian processes) and glaciers. Beach sands and river channel deposits are examples of fluvial transport and deposition, though sediment also often settles out of slow-moving or standing water in lakes and oceans. Desert sand dunes and loess are examples of aeolian transport and deposition. Glacial moraine deposits and till are ice-transported sediments. Dirt is unclean matter, especially when in contact with a person’s clothes, skin or possessions. Common types of dirt include: Dust: a general powder of organic or mineral matter; Filth: foul matter such as excrement; Grime: a black, ingrained dust such as soot; Soil: the mix of clay, sand, and humus which lies on top of bedrock. Silt is granular material of a size between sand and clay, whose mineral origin is quartz & feldspar. Silt may occur as a soil or as sediment mixed in suspension with water and soil in a body of water such as a river. It may also exist as soil deposited at the bottom of a water body, like mudflows from landslides. Silt has a moderate specific area with a typically non-sticky, plastic feel. Silt usually has a floury feel when dry, and a slippery feel when wet. Silt can be visually observed with a hand lens, exhibiting a sparkly appearance. It also can be felt by the tongue as granular when placed on the front teeth (even when mixed with clay particles). These universal filters are 2.5 x 10-inch. Fit most standard under-sink Reverse Osmosis water filtration units or any type of water filtration units with standard 10-inch housing. Reverse Osmosis System Whole House Water System Under Counter-top Water Filter System Counter-top Water Filter System Sediment water filter cartridge usually used as first stage in Reverse Osmosis System Sediment water filter cartridge usually used as a pre-filter in the Whole House Water System to optimize performers and life span of the carbon or GAC filters. Sediment water filter cartridge usually used as a pre-filter in the Under Counter-top Water Filter System to optimize performers and life span of the carbon or GAC filters. Sediment water filter cartridge usually used as a pre-filter in the Counter-top Water Filter System to optimize performers and life span of the carbon or GAC filters. Extraordinary Dirt-Holding Capacity Superior contaminant holding capacity and superior flow rate compared to similar size sediment water filter cartridges. These cartridges will reduce sediment particles as small as 5 microns without adding taste, odor, or color to your water. Such filter cartridges are ideal for all residential, rural, commercial, industrial, and municipal applications. Specifications: Filter Type Fine Melted Polypropylene Flow Rate 5 GPM Height IN/CM 10 IN/24.4 CM Operating Temperature 40°F (4.4°C) – 125°F (51.7°C) Outer Diameter IN/CM 2.5 IN/6.35 CM Operating Pressure 20 PSI (1.4 bar) – 125 PSI (8.6 bar) Inner Diameter IN/CM 1.125 IN/2.5 CM Product Lifetime Replace two or three times a year – depending on your water quality Micron Rating 5 MICRON Packaging This filter is wrapped and sealed and meets NSF (National Science Foundation)

6 Pack Grooved Sediment 5 Micron Water Filters Cartridge 2.5″ x 10″

Grooved Sediment Water Filter Cartridge by Ronaqua 10″x 2.5″, Four Layers of Filtration, Removes Sand, Dirt, Silt, Rust, made from Polypropylene 6 Pack Product Description Industry Standard 10-inch 5 Micron Sediment Filter – Used for effectively removing most sediments, cysts, chlorine, and fluorides. The grooved surface area allows greater dirt holding capacity and a longer lifespan. This filter is ideal for a standard Reverse Osmosis Water Filtration Unit or any type of Water Filtration Unit with a 10 inch housing and WELL-MATCHED Models of Cartridges: Dupont PFC5002,DuPont WFPFC5002, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Hydronix SGC-25-1005, Culligan P5, P5-D, P5A, OmniFilter RS14, RS14-SD, RS14-DS and RS14-SS, GE FXUSC, Aquaboon 25S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05 Product Lifespan: Replace two or three times a year – depending on your water quality This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations. Dimensions: 10 inches x 2.5 inches (24.4 cm x 6.35 cm) WELL-FIT FOLLOWING HOUSINGS AND REVERS OSMOSIS WATER FILTER SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2; iSpring RCC7AK, Global Water RO-505, RO5DX, APEC ROES-50-A, SimPure RPWROKSN075HDB Polypropylene Multi-layer Gradient Filtration Cartridge A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters. This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. The main difference between a Grooved Sediment Filter and a regular Sediment Filter is the surface area; the Grooved Sediment has a larger surface area, which contributes to a longer life span of the filter and thus better filtration. Outer Zone Mid Zone Inner Zone Innermost Zone These Sediment Water Filters Intercept all Following Impurities Rust & Corrosion- Rust is a type of corrosion. Corrosion is the process by which certain materials, metals and non-metals, deteriorate as a result of oxidation. Rusting is oxidation of iron in the presence of air and moisture. … Corrosion requires surface exposure to air or chemicals Coarse Sand is our concrete sand that is washed and screened to a larger grit than our Fine Washed Sand (masonry sand). Coarse Sand is used with aggregate, water, and cement in the production of ready-mix concrete. Hard Scale causes a variety of problems in the home. Stains are probably the most noticeable result of hard water scale. Stains appear in toilets, sinks, and showers. Some hardwater scale are less noticeable, such as scale build up in pipes and in appliances which can cause costly repairs or the need to replace appliances. Fine Sand is very fine, screened sand that is typically tan in color. This type of sand is commonly used as base sand for above ground swimming pools, paving stones, sidewalk blocks and retaining walls. It is alternately used in stucco and cement applications. Particles is a small localized object to which can be ascribed several physical or chemical properties, such as volume, density, or mass. They vary greatly in size or quantity, from subatomic particles like the electron, to microscopic particles like atoms and molecules, to macroscopic particles like powders and other granular materials. Particles can also be used to create scientific models of even larger objects depending on their density, such as humans moving in a crowd or celestial bodies in motion. Sediment is a naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone (sedimentary rocks) through lithification. Sediments are most often transported by water (fluvial processes), but also wind (aeolian processes) and glaciers. Beach sands and river channel deposits are examples of fluvial transport and deposition, though sediment also often settles out of slow-moving or standing water in lakes and oceans. Desert sand dunes and loess are examples of aeolian transport and deposition. Glacial moraine deposits and till are ice-transported sediments. Dirt is unclean matter, especially when in contact with a person’s clothes, skin or possessions. Common types of dirt include: Dust: a general powder of organic or mineral matter; Filth: foul matter such as excrement; Grime: a black, ingrained dust such as soot; Soil: the mix of clay, sand, and humus which lies on top of bedrock. Silt is granular material of a size between sand and clay, whose mineral origin is quartz & feldspar. Silt may occur as a soil or as sediment mixed in suspension with water and soil in a body of water such as a river. It may also exist as soil deposited at the bottom of a water body, like mudflows from landslides. Silt has a moderate specific area with a typically non-sticky, plastic feel. Silt usually has a floury feel when dry, and a slippery feel when wet. Silt can be visually observed with a hand lens, exhibiting a sparkly appearance. It also can be felt by the tongue as granular when placed on the front teeth (even when mixed with clay particles). These universal filters are 2.5 x 10-inch. Fit most standard under-sink Reverse Osmosis water filtration units or any type of water filtration units with standard 10-inch housing. Reverse Osmosis System Whole House Water System Under Counter-top Water Filter System Counter-top Water Filter System Sediment water filter cartridge usually used as first stage in Reverse Osmosis System Sediment water filter cartridge usually used as a pre-filter in the Whole House Water System to optimize performers and life span of the carbon or GAC filters. Sediment water filter cartridge usually used as a pre-filter in the Under Counter-top Water Filter System to optimize performers and life span of the carbon or GAC filters. Sediment water filter cartridge usually used as a pre-filter in the Counter-top Water Filter System to optimize performers and life span of the carbon or GAC filters. Extraordinary Dirt-Holding Capacity Superior contaminant holding capacity and superior flow rate compared to similar size sediment water filter cartridges. These cartridges will reduce sediment particles as small as 5 microns without adding taste, odor, or color to your water. Such filter cartridges are ideal for all residential, rural, commercial, industrial, and municipal applications. Specifications: Filter Type Fine Melted Polypropylene Flow Rate 5 GPM Height IN/CM 10 IN/24.4 CM Operating Temperature 40°F (4.4°C) – 125°F (51.7°C) Outer Diameter IN/CM 2.5 IN/6.35 CM Operating Pressure 20 PSI (1.4 bar) – 125 PSI (8.6 bar) Inner Diameter IN/CM 1.125 IN/2.5 CM Product Lifetime Replace two or three times a year – depending on your water quality Micron Rating 5 MICRON Packaging This filter is wrapped and sealed and meets NSF (National Science Foundation)

Agua BlueRoyal

Av. Solidaridad Lt. h2-51
San Juan de Miraflores
Tel: 970 169 048
ventas@aguablueroyal.com

Agua BlueRoyal
© Todos los derechos reservados 2021