New Hydronamic Engineering 80% automatic shutoff valve (ASV100-RED or ASV-ERP-JG) specifically designed for reverse osmosis systems with permeate pump, to minimize TDS creep at startup. The valve is manufactured in the USA from virgin polypropylene using injection molding and very well constructed. The valve operates off a pressure signal and will automatically shut off water supply when tank pressure is approximately 80% of supply pressure. Retain the benefits of a permeate pump without sacrificing system pressure common with other ASO valves. Supplied standard with 1/4” QC x 1/4” MNPT John Guest male adaptors. Connections – 1/4″ John Guest push to connect fittingsValve Shutoff pressure – 80% of water supply pressureInstallation instructions providedIncludes two (2) 1/4” QC x 1/4” stem elbows
Aquatec ERP-500/ERP-1000 Permeate Pump Mounting Bracket/Mounting Clip
The Aquatec ERP-500/ERP-1000 Permeate Pump Mounting Bracket (or Clip) is a small, durable piece designed to securely hold your permeate pump in place within a reverse osmosis (RO) water filtration system. It keeps the pump stable, properly aligned, and protected from movement or vibration, helping the system run more efficiently and quietly. Made to fit Aquatec ERP-500 and ERP-1000 models, it’s an easy-to-install part that ensures your pump stays firmly mounted for reliable long-term performance. Brings 3/4 Screws. Item is Brand New, free shipping only for the 48 States.
Replacement Pads TEN PACK For Mechanical Leak Detectors/Water Stop Valves (20mm)
Quick and Easy-to-Install Replacement Pads Keep spares at the ready just in case! Be prepared for a leak before it starts, but in the event your leak prevention valve has been triggered, our replacement pads will get you up and running again in seconds. It is never good to run your system without an expansion pad as costly water damage could occur. Keep a few of these on hand just in case. Fits Most Systems Our compressed expandable pads with wider design are designed to fit snugly inside the activation chamber of 17mm-19mm models to ensure they expand vertically effectively triggering the shut off valve. Other pads that fit loosely may not expand correctly, extending the time water is leaking before the device is triggered. Specifications Height 3/8″ (12mm) Diameter 3/4″ (20mm) Snug Fit Design Activation pads should fit tightly inside the trigger chamber to ensure a positive, vertical expansion. AROUND THE CLOCK PROTECTION: When water makes contact with the pad, our compact, dense sponge with a wide base allows for full vertical expansion utilizing the full pad tray ROBUST THICK PAD: Our pads are designed to fit snug in each device. Smaller tablets may expand slightly off-center and potentially not trigger the device properly VERSATILE: 20mm wide fits perfectly with most 20mm-22mm pad leak detector/water stop valves NOT COMPATIBLE with AQUASURE, METPURE, ICON, ISPRING or EXPRESS WATER systems. Please use 18mm pads CONVENIENT recloseable storage containers keep pads sealed until needed VALUE PACK of TEN replacement pads ensure you always have spares handy
