Untitled Document 10 Inches Transparent Standard Whole House Water Filter System with Presser Relief Valve, 3/4” Inlet/Outlet Brass Port and Yearly Supply (4) Sediment Cartridges 10 Micron Product Description DURABLE STRUCTURE: 10” Transparent Standard Housing is proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. 10” Standard 10 Micron Sediment Filters Used for effectively removing most sediments from water POINT OF USE: This System for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances. Keeps water fresh by reducing sediment, scale, rust, dirt, sands, and silt EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed 10 MICRON SEDIMENT CARTRIDGE is wrapped and sealed and meets NSF Standards and Regulations. Dimensions: 10” x 2.5”. WELL-MATCHED: Dupont PFC5002, WFPFC5002, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Hydronix SGC-25-1005, Culligan P5, P5-D, P5A, OmniFilter RS14-SD and RS14-SS, GE FXUSC, Aquaboon S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05, however for best preferment use only original RONAQUA CARTRIDGES WELL-MATCHED FOLLOWING HOUSINGS SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2 Description: The 10″ Transparent Standard Housing for Whole House Water Filtration System with 3/4″ Inlet / Outlet Brass Ports (RA-125-10) is proper to use for reducing sediment, dirt, rust, & suspended particles in incoming water to you house. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The blue cap has 3/4″ inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief valve on the outlet side of the cap releases pressure in the housing for changing filter cartridges. Those Housings for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation. Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs. Filter Cartridges Included in this Set are Melt-blown Four Layers Filtration Polypropylene Sediment Filter (4 pack) A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters. This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. Multi-layer Gradient Filtration Outer Zone Mid Zone Inner Zone Innermost Zone These Sediment Water Filters Intercept all Following Impurities Rust & Corrosion- Rust is a type of corrosion. Corrosion is the process by which certain materials, metals and non-metals, deteriorate as a result of oxidation. Rusting is oxidation of iron in the presence of air and moisture. … Corrosion requires surface exposure to air or chemicals Coarse Sand is our concrete sand that is washed and screened to a larger grit than our Fine Washed Sand (masonry sand). Coarse Sand is used with aggregate, water, and cement in the production of ready-mix concrete. Hard Scale causes a variety of problems in the home. Stains are probably the most noticeable result of hard water scale. Stains appear in toilets, sinks, and showers. Some hardwater scale are less noticeable, such as scale build up in pipes and in appliances which can cause costly repairs or the need to replace appliances. Fine Sand is very fine, screened sand that is typically tan in color. This type of sand is commonly used as base sand for above ground swimming pools, paving stones, sidewalk blocks and retaining walls. It is alternately used in stucco and cement applications. Particles is a small localized object to which can be ascribed several physical or chemical properties, such as volume, density, or mass. They vary greatly in size or quantity, from subatomic particles like the electron, to microscopic particles like atoms and molecules, to macroscopic particles like powders and other granular materials. Particles can also be used to create scientific models of even larger objects depending on their density, such as humans moving in a crowd or celestial bodies in motion. Sediment is a naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone (sedimentary rocks) through lithification. Sediments are most often transported by water (fluvial processes), but also wind (aeolian processes) and glaciers. Beach sands and river channel deposits are examples of fluvial transport and deposition, though sediment also often settles out of slow-moving or standing water in lakes and oceans. Desert sand dunes and loess are examples of aeolian transport and deposition. Glacial moraine deposits and till are ice-transported sediments. Dirt is unclean matter, especially when in contact with a person’s clothes, skin or possessions. Common types of dirt include: Dust: a general powder of organic or mineral matter; Filth: foul matter such as excrement; Grime: a black, ingrained dust such as soot; Soil: the mix of clay, sand, and humus which lies on top of bedrock. Silt is granular material of a size between sand and clay, whose mineral origin is quartz & feldspar. Silt may occur as a soil or as sediment mixed in suspension with water and soil in a body of water such as a river. It may also exist as soil deposited at the bottom of a water body, like mudflows from landslides. Silt has a moderate specific area with a typically non-sticky, plastic feel. Silt usually has a floury feel when dry, and a slippery feel when wet. Silt can be visually observed with a hand lens, exhibiting a sparkly appearance. It also can be felt by the tongue as granular when placed on the front teeth (even when mixed with clay particles). Specifications: Filter Type Fine Melted Polypropylene 10 MICRON Flow Rate 5 GPM Unit Height IN/CM 12.5 IN/31.75 CM Operating Temperature 40°F (4.4°C) – 125°F (51.7°C) Unit Length IN/CM 5.125 IN/13.02 CM Operating Pressure 20 PSI (1.4 bar) – 60 PSI (4.5 bar) Unit Width IN/CM 5.125 IN/13.02 CM Cartridge Lifetime Replace two or three times a year – depending on your water quality Inlet/Outlet Ports 3/4″ NPT Bress Cartridge Packaging This filter is wrapped and sealed and meets NSF (National Science Foundation)
Waterdrop 17UA Under Sink Water Filter System, 19K Gallons
Product Description · 【Ultra-long service life】When used with municipal water, each undersink water filter has a maximum service life of 24 months or 16,000 gallons. · 【Innovative multistage filtration】The Waterdrop Direct Connect Undersink Water Filtration System uses innovative multistage filtration. And it can effectively reduces heavy metals, chemical pollutants, sediment and other large particles. · 【Authority Guaranteed materials】Specially selected premium materials are lead-free, which is fully certified by the WQA against NSF 372 standard. Cost-effective choiceOn average, you’ll spend 0.07 dollar per day for the first year. You’ll pay only 0.03 dollar per day for the filter replacement and your water quality will improve with each passing day. Simple installationThe installation process is as user-friendly as it gets. Due to the innovative system design, installation takes only 3 minutes. Replacing the filter also takes only 3 seconds. Stable and fast water flowThe system has a stable water flow and high filtration efficiency. The tested full flow rate is 0.75 gpm at 60 psi. You’ll get filtered water without the wait.Multiple applicationsThe system is designed to connect to your original faucet. It can be installed under your sink or in RV in multiple ways. · 【Premium dedicated faucet】The undersink water filtration system comes with a lead-free brushed stainless steel faucet. · 【Easy installation】With innovative push-to-connect fittings, installation takes less than 3 minutes. The undersink water filtration system comes with a feed water adapter that can connect to the tubing. · 【Fast flow rate & multiple uses】The tested full flow rate of this undersink water filtration system is 0.75 gpm at 60 psi. Replacement for 15UB Undersink Filter System15UB-UF Undersink Filtration System with Faucet17UB Undersink Filtration System with Faucet15UA Undersink Filtration SystemSituationUndersink/RV/BathroomUndersink/RV/BathroomUndersink/RV/BathroomUndersink/RV/BathroomReduce Substancesmost of pollutants such as chlorine, taste and odor, sediment, rust and other heavy metalsmost of pollutants larger than 0.01 micronmost of pollutants such as chlorine, taste and odor, sediment, rust and other heavy metalsmost of pollutants such as chlorine, taste and odor, sediment, rust and other heavy metalsFiltration Capacity16000 Gallons16000 Gallons19000 Gallons16000 GallonsGallons Per Minute0.75GPM0.75GPM0.75GPM0.75GPMReduce TDSNoNoNoNoRetain Beneficial minerals✓✓✓✓
NSA 50C Bacteriostatic Water Filter Treatment Unit Canister NSA50C New NOS.
Box has storage wear but everything is new.
3 Stage Reverse Osmosis Countertop Portable Tank-Less Space Saver 50 GPD System
3 Stage Reverse Osmosis Countertop Portable Tank-Less Space Saver Water Universal Filtration System for Drinking Water or Aquarium Fish Tank Filter NSF Certified 50 GPD Membrane Removal Rate 98% Product Description CONVENIENT RO WATER The 3 Stage system is portable water filter unit requiring minimum installation perfect for customers who are buying an RO system for the first time and need to eliminate small impurities like chlorine, taste and odor from the city water. Ideal for producing up to 50GPD of drinking water or Aquarium Water Treatments like Fish Tank’s, Reef Tanks, Salt Water and Fresh Water Aquariums, optimal for fish, coral, & other aquatic life & plants. PREMIUM QUALITY 1st Stage: Inline Sediment Filter removes unwanted particulate such as sand, silt, and rust, made of 100% Fine Melted Polypropylene 2nd Stage: Inline Carbon Filter reduces chlorine, taste and odor, made of Fine Activated Coconut Shell Carbon, 3rd Stage NSF/ANSI standard 58 Certified 50GPD RO Membrane effectively removes up to 98 percent of the Total Dissolved Solids (TDS) in water, made of the highest quality spiral-wound Polyamide SMART DESIGN-this machine takes minimum space, with size only 14.5 x 8.8 x 5.11 inches could be used anywhere: RVs, Apartments, Dorms, Boats, Offices, Food Trucks, Counter Tops. The ratio of pure water and waste water is 1:2. Quick connect push in fittings provide leak free connections. System comes with all parts for an easy and fast installation. Sediment filter used in this system has four separate gradient density layers of filtration enhance cartridge performance, higher dirt-holding capacity than the similar sized sediment water filter. It has quick connect fittings, meets NSF (National Science Foundation) Standards and Regulations. Product Lifetime: Replace two or three times a year – depending on your water quality and application. Dimensions: 10 inches x 2 inches (25.4 cm x 5.08 cm) Activated Carbon filter used in this system is made of fine coconut shell carbon. It removes odors, undesirable colors & unpleasant tastes. It is also is effective in removing chemicals like iron, manganese, chlorine & hydrogen sulfide from water to name a few. It has quick connect fittings, meets NSF (National Science Foundation) Standards and Regulations. Product Lifetime: Replace 2 or 3 times a year – depending on your water quality & application. Dimensions: 10 x 2” (25.4 cm x 5.08 cm) Description: Tank less and without faucet, ultra-fresh, clean, great tasting water with the best quality for aquarium water treatments like fish tanks, reef tanks, salt water and fresh water aquariums, or cooking and making delicious coffee, ice. Save money, time, and hassle of buying costly, bottled water or bulky complicated water treatment systems and enjoy ultra-safe water that is contaminant free. This reverse osmosis system use NSF certified membrane to deliver the highest quality clean, filtered drinking water. This complete 3-stage water filter system is made from high quality components to offer exceptional contaminant rejection rates and long-lasting, reliable performance. RO3-50 GPD is an affordable workhorse to remove up to 99% of all contaminants, such as chlorine, taste, odor, toxic fluoride, arsenic, lead, and chromium. This efficient and productive or system will provide your family with trouble-free, high quality drinking water for many years to come. System comes with all parts for an easy DIY experience, don’t waste money for professional installation, you can understand everything about your system and install it with our clear, well-organized instructions. Please flush new filters 30 minutes Inline Sediment Water Filter A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters. This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. When people say water filter, they most frequently mean a carbon filter of some variety, because since the Egyptians discovered that storing water in charcoal made it stay fresher and taste better, carbon has been a standard feature in water treatment. Its centuries of popularity attest to its effectiveness. Inline Granular Carbon Water Filter Granular Activated Carbon Filters (GAC) are well-known for efficiently reducing chemical compounds, foul tastes, and smells from water. These filters remove and reduce organic and industrial chemicals that seep into water sources and through plumbing. All Ronaqua GAC filters are made with high quality coconut shell carbon crushed into positively charged granules. The positively charged granules in the filter remove negative ions from the water, such as: chlorine, fluorides, ozone, and dissolved organic solutes, effectively providing good general-purpose drinking water. These filters are constructed to allow water to enter in one end and pass through the entire length of the carbon bed before exiting through the other end of the cartridge, while an internal expansion pad minimizes channeling or bypass before the water exits the cartridge. What is Granular Activated Carbon? Granular Activated Carbon is created from organic raw materials that are high in carbon. Such materials include wood, coal, and lignite – a type of brown coal made from naturally compressed peat. Activated Carbon effectively absorbs pollutants and particulars because it is highly porous and provides a large surface area that allows it to continue to take in particles found in the water. Chlorine removal is what carbon is best at, and nothing else equals carbon’s ability to remove chlorine. What is Activated Carbon Block? Besides the physical absorption that the Activated Carbon Block filter can provide, it also filters the water via a chemical process. The Activated Carbon Block filter is positively charged, thus it is able to attract negatively charged particles such as: chlorine, benzine, and other volatile organic compounds, and prevent them from flowing out into your glass. Carbon is well known for its unique absorbing ability; just a pound of carbon is able to provide up 125 acres of filtering surface area. NSF Certified TFC 50GPD Membrane The reverse osmosis membrane is a thin film composite membrane that can remove up to 99% of over 1, 000 contaminants in the water, including lead (removes up to 98% of lead), chlorine, fluoride, arsenic, asbestos, calcium, sodium, and more. Tested by independent third-party to meet NSF/ANSI Standards, Hidrotek Reverse Osmosis Membrane is made of food-grade high capacity material that provides high packing density to remove contaminants. With the 0.0001 micron size, it only allows water molecules to squeeze through and virtually nothing else. Operation Specification: Model: HLW-1812-50G, length 11.8(inches), diameter 1.8(inches) Product rate of flow: 50GPD（8L/H，190L /D） Product process: dry film process, extend the life time by max Filter accuracy: 0.0001micron Operation pressure: 0.3-0.8Mpa Appliance water: municipal water supply Appliance temperature: 41-113 ℉ Life time: 2-3 years. It depends on usage amount and feed water quality. Specifications: Filter Type Polypropylene Sediment, Coconut Shell Activated Carbon Block 5 Micron & Granular Activated Carbon Flow Rate 5 GPM Unit Height IN/CM 13.125 IN/33.34 CM Operating Temperature 40°F (4.4°C) – 125°F (51.7°C) Unit Length IN/CM 15.5 IN/39.37 CM Operating Pressure 20 PSI (1.4 bar) – 60 PSI (4.5 bar) Unit Width IN/CM 7 IN/17.78 CM Cartridge Lifetime Replace two or three times a year – depending on your water quality Water Supply Connection Ball Valve Cartridge Packaging This filter is wrapped and sealed and meets NSF (National Science Foundation)
